Harbor Freight Tools 92122 operating instructions Save This Manual

Page 2

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

General Safety Rules

WARNING! Read all instructions Failure to follow all instructions listed below may result in injury.

SAVE THESE INSTRUCTIONS

1.Work area safety

a.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b.Keep children and bystanders away while servicing the Lights. Distractions can cause you to lose control.

2.Personal safety

a.Stay alert, watch what you are doing and use common sense when installing the Lights. Do not install while you are tired or under the influence of drugs, alcohol or medication.

b.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask and work gloves used for appropriate conditions will reduce personal injuries.

product that cannot be controlled with the switch is dangerous and must be repaired.

b. Disconnect the battery before storing the Lights.

c. Maintain the Lights. Check for misalignment or breakage of parts and any other condition that may affect operation. If damaged, have the Light repaired before use.

5.Service

a.Have your Lights serviced by a qualified repair person using only identical replacement parts.

Specific Safety Rules

1.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2.This product is not a toy. Keep it out of reach of children.

3.Dispose of batteries in a manner appropriate to their type according to State, Local and Federal laws and regulations.

4.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

3.Light use and care

a.Do not use the Light if the switch does not turn it on and off. Any

Save these instructions.

SKU 92122

For technical questions, please call 1-800-444-3353.

Page 2

Image 2
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSave This Manual Unpacking SpecificationsInitial Set Up Instructions Operating InstructionsNo Light Maintenance And ServicingDim Light Record Product’s Serial Number Here Assembly diagramPart Description Qty