Harbor Freight Tools 92863 operating instructions Figure D, To Start The Generator

5.Before the first use, remove the Fuel Tank Cap (30) and fill the Fuel Tank (26) with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the Engine’s Fuel Gauge (27) for the amount of unleaded gasoline in the Fuel Tank. If necessary, refill the Fuel Tank with unleaded gasoline. (See Figure D.)

FUEL TANK

CAP

(30)

FUEL TANK

(26)

FUEL GAUGE

(27)

FIGURE D

To Start The Generator:

1.IMPORTANT! Engine oil MUST be added to the Engine’s crankcase prior to starting and running the Engine. Failure to add oil, according to the Engine manufacturer’s recommendations, will damage the Engine and void its warranty.

2.Turn the Fuel Valve (25) to its “OPEN” position.

(See Figure E, next page.)

3.Move the Engine’s Fuel Choke to its “START” position. (See Figure E.)

4.Turn the Engine’s “ON/OFF” Switch to its “ON” position

(See Figure E.)

5.Grasp the Handle of the Engine’s Starter Rope and rapidly pull the Starter Rope to start the Engine. NOTE: It may take one or more pulls on the Starter Rope to start the Engine.

6.Allow the Engine to run for several seconds, then move the Engine’s Fuel Choke all the way to the left to its “RUN” position. (See Figure E.)

SKU 92863 For technical questions, please call 1-800-444-3353. PAGE 13