Assembly

6.Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.

7.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

8.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.

9.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function.

10.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.

11.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.

12.Observe area conditions. Do not use product in damp or wet locations. Do not expose to rain.

13.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across the Log Splitter. Never place hands or feet between the log and splitter wedge or between the log and ram during the forward or reverse stroke.

14.Never leave the product unattended while in operation.

15.Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before operating.

16.Never place your hands or other body parts near a hydraulic fluid leak. Never check for a leak with your hands or other body parts. High-pressure fluid can be forced under your skin resulting in serious injury.

17.Never attempt to split two logs on top of each other.

Warning:	The warnings, cautions, and instructions discussed in this instruction manual cannot cover all
	possible conditions and situations that may occur. It must be understood by the operator that
	common sense and caution are factors which cannot be built into this product, but must be
	supplied by the operator.
Warning:	This product contains or produces a chemical known to the State of
	California to cause cancer and birth defects (or other reproductive harm).
	(California Health & Safety Code 25249.5 et seq.)
	Assembly

Your Log Splitter will require complete assembly prior to operation. It is important that you read the entire manual to become familiar with the unit BEFORE you use the Log Splitter. Before assembling your Log Splitter be sure that you have all parts described in the Parts List.

When assembling your Log Splitter, it will be helpful to refer each of the operational Figures as well as to the Parts List and Assembly Diagram on the last pages of this manual.

Assemble attachments based on the intended use of the Log Splitter.

Mounting Surface: The mounting surface must be flat, level and capable of supporting the weight of the Log Splitter combined with the materials to be split.

#42696

Page 3

42696 specifications

Harbor Freight Tools 42696 is a versatile and practical tool that has garnered considerable attention among DIY enthusiasts and professional tradespeople alike. This product stands out thanks to its blend of robust features, cutting-edge technologies, and user-friendly characteristics that cater to a wide range of applications.

One of the primary features of the Harbor Freight Tools 42696 is its powerful motor. This ensures that the tool can handle various tasks with ease, whether you're cutting, grinding, or polishing. The motor operates efficiently, providing ample torque for demanding jobs while maintaining energy efficiency, which is an important consideration for both home users and professionals.

The design of the 42696 emphasizes durability and longevity. It is built with high-quality materials that withstand rugged use in different environments. This construction not only enhances the tool's lifespan but also ensures that it can handle heavy workloads without compromise. The ergonomic handle is another significant characteristic, providing comfort and reducing fatigue during extended use. This feature is particularly appreciated by users who engage in long projects that require considerable effort.

Harbor Freight Tools 42696 also incorporates advanced technology that elevates its functionality. For instance, it may include features such as variable speed settings, allowing users to adjust the tool's performance based on the specific task at hand. This versatility is ideal for those who require precision in their work, as it enables finer control over speed and output.

Additionally, the tool is designed for safety, having features like a protective guard that minimizes the risk of injury during operation. User safety is a priority in tool design, and the 42696 delivers on this front, ensuring peace of mind while working.

Another notable characteristic is the tool's compatibility with a wide range of accessories. This allows users to customize their experience, switching out parts as needed for specific tasks, enhancing both the versatility and functionality of the tool.

Overall, Harbor Freight Tools 42696 exemplifies quality and reliability. Its powerful motor, durable design, ergonomic comfort, advanced technology, safety features, and compatibility with various accessories make it an excellent choice for anyone in need of a dependable tool that can tackle a variety of projects efficiently. Whether for professional use or personal hobbies, the 42696 stands out as a valuable addition to any toolbox.

(California Health & Safety Code 25249.5 et seq.)

#42696

42696 specifications