Marantz SR7300 manual Other Function

Page 36

ENGLISH

OTHER FUNCTION

 

 

 

TV AUTO ON/OFF FUNCTION

 

 

This function allows the component connected to the TV-VIDEO in

 

jack to control the power (ON/OFF) to the SR7300.

 

AUTO POWER ON

 

 

1.

Be sure TV auto mode is ENABLE. (Refer page 24 : System

 

2.

Setup)

 

Connect your TV TUNER (etc) to the TV-VIDEO in terminal. Be

 

3.

sure to connect the VIDEO input.

 

Turn OFF the power to the TV TUNER and the SR7300.

 

4.

Turn ON the TV TUNER and tune in a receivable station.

 

5.

When the station is received, the SR7300 turns ON and TV is

selected automatically.

AUTO POWER OFF

1. In the above situation, turn the TV TUNER OFF or select a channel that does not contain any broadcast.

2. The power to the SR7300 switches to STANDBY after approx. 5 minutes.

Notes:

•AUTO POWER OFF is canceled if the SR7300 is set to a source other than TV.

The function reactivates when TV is selected again.

•Some TV broadcasts may cause the TV AUTO FUNCTION to turn ON.

•S-Video terminal does not support “TV AUTO ON/OFF” function.

ATTENUATION TO ANALOG INPUT SIGNAL

If the selected analog audio input signal is greater than the capable level of internal processing, “PEAK” indicator will light up on the front display. If this happens, you should press the ATT button on the front panel or on the remote.

“ATT” indicator will light up when this function is activated. The signal- input level is reduced by about the half. Attenuation will not work with the output signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT, VCR2- OUT and MULTI ROOM OUT.

This function is memorized for each individual input source.

LISTENING OVER HEADPHONES

This jack may be used to listen to the SR7300’s output through a pair of headphones. Be certain that the headphones have a standard 1/4" stereo phone plug. (Note that the main room speakers will automatically be turned off when the headphone jack is in use.)

Notes:

•When using headphones, the surround mode will automatically change to STEREO.

•The surround mode returns to the previous setting as soon as the plug is removed from the jack.

32

VIDEO ON/OFF

When no video signals of a DVD, etc., are connected to the SR7300 or the DVD, etc., are connected directly to a TV, the unnecessary video circuit can be turned off by selecting the “VIDEO OFF” setting.

To select video off condition, press the V-OFFon the remote.

Notes that VIDEO OFF will not work with the output signal of MULTI ROOM OUT.

AV SURROUND RECEIVER SR7300

SURROUND

SURROUND

DIGITAL

PCM

DISPLAY MODE

AV SURROUND RECEIVER SR7300

SURROUND

SURROUND

DIGITAL

PCM

You can select the display mode for the front display of the SR7300. To select this mode, press the DISP. on the remote control unit. When this button is pressed, the display mode is switched in the following sequence.

→Surround Mode → Auto-display Off → Display Off → Input Function → Surround Mode....

In Auto display off mode, turn the display on automatically, after that any condition of SR7300 is changed.

In Display off mode, turn the display off completely.

Notes:

•Only DISP indicator will light up on the front display in display off condition

SELECTING ANALOG AUDIO INPUT OR

DIGITAL AUDIO INPUT

AV SURROUND RECEIVER SR7300

SURROUND

If you have already assign any digital input to input source.

You can select temporarily the audio input mode for each input source with the A/D button on the remote controller or front panel.

When this button is pressed, the input mode is switched in the following sequence.

→Digital Auto → Digital → Analog → Digital Auto....

In Digital Auto mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected automatically.

If no digital signal is being input, the analog input jacks are selected automatically.

In Digital mode, input is fixed to an assigned digital input terminal. In analog mode, the analog input jacks are selected.

This selecting is temporarily, so the result will not be stored in memory. If you need to change input mode completely, use SYSTEM SETUP in OSD menu system.(see page 22)

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Model SR7300 User Guide Risk of Electric Shock Read Before Operating Equipment AC Polarized PlugPage Table of Contents Introduction DescriptionEnglish Features AccessoriesFront Panel @0PHONES jack for stereo headphones 3AUX1 input jacks4INPUT Function Selector buttons AUDIO/ Video 5SPEAKERS A/B buttonFL Display Rear Panel VCR2SBR, C AC Outlets ⁄6AUDIO IN/OUT CD, TAPE, CD-R, TV DVD, VCR1, DSS/VCR2Names and Functions ⁄7SETUP button ¤3VOLUME / buttons¤4P.SCAN preset scan button ‹2SLEEP sleep timer buttonRemote Control Range Loading BatteriesAMP Mode Tuner ModeGeneral Infromation of RC7300SR To SR7300Speaker Placement ConnectionsHeight of the Speaker Units Connecting Speakers Connecting Speaker WireConnecting Banana Plug Connecting a SubwooferConnecting Audio Components Connecting Digital Audio ComponentsConnecting Video Components VIDEO, S-VIDEO , Componentt JacksVideo jack Component jackAdvanced Connecting Connecting Remote Control JacksSubwoofer Front Center LeftConnecting the Antenna Terminals Connecting the Supplied AntennasConnecting AN FM Outdoor Antenna Connecting AN AM Outdoor AntennaConnecting for the Multi Room MonitorSetup On Screen Display Menu SystemUnlocked Speaker Setup Speaker SizeRight speakers Speaker Distance Speakers LevelSelect Surround in Setup Main Menu with or PreferenceSurround Channel LevelSelect PRO Logic II in Setup Main Menu with or PL II PRO Logic II Music ParameterCS II Circle Surround II Parameter Multi RoomDC Trigger Setup Select DC-TRIG Setup in Setup Main Menu with orCH Input Level Selecting the Surround Mode Adjusting the Main Volume EnglishAdjusting the Tonebass & Treble Control Basic Operation Play BackUsing the Sleep Timer Night ModeTemporarily Turning OFF the Sound Surround Mode Virtual StereoSource Direct Front speakers Other Function Recording AN Analog Source Speaker A/BInput selector button OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT outputsCH Input AUX2 InputPreset Memory Basic Operation TunerListening to the Tuner Manual Preset Memory Recalling a Preset Station Preset ScanClearing Stored Preset Stations Sorting Preset Stations Name Input of the Preset Station→ B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP → Multi Room Playback Using Multi Room OUT Terminals Multi Room SystemSecond Room GeneralRemote Controller Operation Controlling Marantz ComponentsControlling a Marantz MD Deck MD Mode Controlling a Marantz Tape Deck Tape ModeDeck a B Learn Mode Learning ProcedureErasing Learning Code Erasing the code by buttonsMacro Mode Programming MacrosErasing the all functions Using Macros Editing MacrosConfirming Macros AMP*→ 2 Power on → 3 DVD → 4 AMP*→ 5 8 Virtual → 6 DVD* → 7 Examples of Macro ProgramsExample PlayClearing Macro Programs Troubleshooting Are the power amplifiers and speaker working properly ?General Malfunction HOW to Reset the Unit Memory backupTechnical Specifications DimensionIs a registered trademark

SR7300 specifications

The Marantz SR7300 is a powerful and versatile home theater receiver that has garnered attention for its impressive audio performance and extensive feature set. Designed for both audiophiles and casual listeners, the SR7300 stands out in an ever-competitive market with its blend of advanced technologies and elegant design.

One of the main features of the SR7300 is its robust amplification capabilities. The receiver delivers up to 110 watts per channel over seven channels, ensuring that even the most demanding audio tracks are handled with ease. This level of power is complemented by Marantz's proprietary HDAM (Hyper Dynamic Amplification Module) technology, which enhances dynamic range and overall sound quality. The HDAM circuitry is designed to provide superior audio reproduction compared to conventional op-amps, delivering rich, detailed sound that is a hallmark of Marantz products.

The SR7300 supports numerous audio formats, including Dolby Digital EX and DTS-ES, which creates an immersive surround sound experience. With the addition of Dolby Pro Logic II, users can enjoy enhanced stereo sound from their existing two-channel sources. The receiver also features onboard decoding for high-resolution audio formats, ensuring compatibility with the latest audio technologies.

For video enthusiasts, the Marantz SR7300 offers multiple HDMI inputs, making it a hub for all your home entertainment devices. The receiver supports 1080p video upscaling, which enhances lower-resolution sources and delivers stunning picture quality on high-definition displays. Additionally, the SR7300 is equipped with advanced video processing capabilities, ensuring that it can handle a wide range of video formats.

Another notable characteristic of the SR7300 is its user-friendly interface. The receiver includes a large on-screen display and an intuitive remote control, allowing users to easily navigate through settings and configurations. The inclusion of programmable presets makes it simple to switch between different audio and video settings for various listening scenarios.

With its solid build quality and classic Marantz aesthetics, the SR7300 not only performs exceptionally well but also looks great in any home theater setup. Its combination of advanced technologies, ease of use, and impressive audio-visual capabilities make it a standout choice for those seeking a high-performance receiver that doesn’t compromise on sound or functionality.

In summary, the Marantz SR7300 merges power with sophistication, making it a vital component for any serious home theater system. Whether you’re listening to music, watching movies, or gaming, the SR7300 ensures a captivating experience that resonates with both clarity and depth.
Top Page Image Contents