Cleaning, Maintenance, and Lubrication

y fet Sa

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent SERIOUS injury from TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Setup

no rati

1.BEFORE EACH USE, inspect the general condition of the tool. Check for:

•leaking, swollen, or cracked battery,

•loose hardware,

•misalignment or binding of parts,

•cracked or broken parts, and

•any other condition that may affect its safe operation.

2.After Use, wipe external surfaces of the tool with clean cloth.

3.Change the battery as needed.

a.Turn the Power Switch off and Unplug the Solar Panel Cable.

b.Unthread the Wing Nut and Bolt Set and remove the Lamp or Solar Panel.

c.Unthread the six screws on the back of the unit and remove the back cover.

d.Remove the old battery and replace with the same type of battery paying attention to the polarity (±) orientation.

e.Replace the back cover and secure with the six screws.

f.Remount the Unit and plug the Solar Panel Cable into the outlet.

g.Keep the Power Switch off and allow the battery to charge for 8 hours of full sunlight.

h.Turn on the Power Switch.

Ope

Maintenan

Troubleshooting

Problem		Possible Causes		Likely Solutions
Light won’t	1.	Power is not on.	1.	Check that Power Switch is set to ON.
turn on.	2.	Cable connection is loose.	2.	Plug in firmly at back of Battery Housing.

3.Battery pack not fully charged. 3. Keep solar panel clean. Allow to charge in full sunlight for 8 hours with the Power Switch OFF.

Light turns on	Light is positioned in		Move light to a location that is lit during the day.
during day.	a dark location.
Light flashes	1.	Low battery.	1.	With Switch set to “OFF”, allow to charge in full
on and off with				sunlight for 8 hours before further use.
clicking sounds.	2.	Battery needs replacing.	2.	Replace battery pack.
Light stays	Frequent changes in		Check sensing area for possible heat sources
bright.	heat being detected.		such as air vents, vehicles or objects in wind.
			Reposition the Motion Detector Light if needed.
Light brightens	1.	Changes in heat are being	1.	Check sensing area for possible heat sources
and darkens		detected from a fixed heat		such as air vents, vehicles or objects in wind.
continuously.		source or moving object.		Reposition the Motion Detector Light.
	2.	Sudden temperature change	2.	Turn Power Switch “OFF” until storm passes.
		due to storms or high winds.		Mount in a sheltered location.

Follow all safety precautions whenever diagnosing or servicing the tool.

Disconnect Battery Pack and Charger power supply before service.

Page 6

For technical questions, please call 1-800-444-3353.

Item 69644

36 specifications

Harbor Freight Tools, a well-known retailer of quality tools and equipment at affordable prices, has made a significant mark in the industry with its diverse range of products. Among its extensive inventory is the Harbor Freight Tools 36, a tool that stands out for its exceptional features and practical applications. This versatile tool is designed for both professional tradespeople and DIY enthusiasts, making it an essential addition to any workshop.

One of the most striking features of the Harbor Freight Tools 36 is its robust construction. Engineered with durability in mind, it is made from high-quality materials that can withstand heavy usage. This ensures that it remains reliable over time, eliminating the need for frequent replacements. The tool's design also emphasizes ease of use, incorporating ergonomic elements that enhance comfort during operation, thereby reducing user fatigue.

The Harbor Freight Tools 36 boasts cutting-edge technology that sets it apart from competitors. It incorporates advanced safety features designed to protect users from accidents, making it ideal for those who may be novice users. The tool also includes precision engineering that allows for accurate results, ensuring that tasks are completed efficiently and effectively.

Another noteworthy characteristic of the Harbor Freight Tools 36 is its versatility. It can be employed in a wide range of applications, from simple home repairs to complex construction tasks. This adaptability makes it a favorite among users who appreciate multifunctional tools that maximize their investment.

Portability is another advantage of the Harbor Freight Tools 36. Lightweight yet sturdy, it can be easily transported to various job sites without compromising performance. This is particularly beneficial for tradespeople who require reliable tools on the go.

Moreover, Harbor Freight Tools has a reputation for offering products at competitive prices, making high-quality tools accessible to a broader audience. The cost-effectiveness of the Harbor Freight Tools 36 means that users can invest in reliable equipment without breaking the bank.

In summary, the Harbor Freight Tools 36 is a remarkable tool that embodies durability, safety, versatility, and affordability. Its cutting-edge technology and user-friendly design make it a valuable asset for anyone looking to tackle projects with confidence and precision. Whether you're a seasoned professional or a hobbyist, the Harbor Freight Tools 36 is a tool worth considering for your toolkit.

y fet Sa

Maintenance and Servicing