Harbor Freight Tools 40318 operating instructions Grounding / Voltage Warning, Extension Cords

Page 7

GROUNDING / VOLTAGE WARNING

Common household current is 110-120 volts. As long as the outlet used with this tool is rated from 110-120V there will be no complications using it with household receptacles. Plug the tool into a 110-120V properly grounded outlet protected by a 30-Amp., dual element time delay or circuit breaker.

NEVER try to plug a 110-120V tool into a 220-240V circuit or serious complications and possible injury to the operator may occur. The plugs have different shapes to prevent this.

This tool has a three-prong plug. The third (round) prong is the ground. Cutting off the ground will result in a safety hazard and void the warranty.

If the outlet you are planning to use is the two-prong type, do not remove or alter the grounding prong in any manner. Use an adapter and always connect the grounding lug to a known grounding source. It is recommended that you have a qualified electrician replace the two-prong outlet with a properly grounded three- prong outlet.

EXTENSION CORDS

Your tool has a three-prong plug, therefore you must use a three-prong extension cord. Only use rounded jacket extension cords listed by the Underwriters Laboratories (UL). Improper use of extension cords may cause inefficient operation of your tool which can result in overheating. Be sure your extension cord is rated to allow sufficient current flow to the motor.

If you are using the tool outdoors, use an extension cord rated for outdoor use (signified by “WA” on the jacket).

The extension cord must have a minimum wire size depending on the amperage of the tool and the length of the extension cord. This size is determined by its AWG (American Wire Gauge) rating. The smaller the gauge, the greater the cable’s capacity. The amount of cords used does not matter: Total length determines the minimum AWG rating. Every cord must meet the AWG rating. Use the chart below to determine what AWG rating is required for your situation. Cord length is rated in feet. Harbor Freight Tools can supply UL listed and outdoor rated cords in multiple AWG ratings if needed.

 

AWG RATING CHART

 

 

 

 

CORD LENGTH

25’

50’

75’

100’

125’

150’

175’

200’

AMPS

AWG

AWG

AWG

AWG

AWG

AWG

AWG

AWG

0-10.0

18

18

16

16

14

14

12

12

10.1-13.0

16

16

14

14

14

12

12

12

13.1-15

14

14

12

12

12

12

12

—-

15-18

14

12

12

12

12

12

—-

—-

Do not modify your plug in any way. If you have any doubt, call a qualified electrician.

Page 7 SKU# 40318

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Log Splitter Features of this LOG Splitter Specifications Model # 40318 LOG SplitterSave this Manual Page Special Warnings When Using this LOG Splitter Major Components Overview AssemblyPlease Refer to on page 5 in following these instructions OperationGrounding / Voltage Warning AWG Rating Chart Cord LengthExtension Cords Changing the Hydraulic Oil MaintenanceModel # 40318 LOG Splitter Parts List Model # 40318 LOG Splitter Parts Diagram

40318 specifications

Harbor Freight Tools 40318 is a versatile and reliable tool that caters to both professional tradespeople and DIY enthusiasts. This tool is designed to streamline tasks and improve efficiency, making it a popular choice among users looking for quality at an affordable price.

One of the standout features of the Harbor Freight Tools 40318 is its powerful motor. This motor not only ensures high performance but also contributes to the tool's durability, allowing it to withstand intensive use over time. With its robust design, the tool is capable of handling a variety of materials, making it suitable for different projects, whether crafting, woodworking, or metalworking.

The 40318 is equipped with a range of user-friendly technologies that enhance its functionality. Its adjustable speed settings allow users to customize their experience according to the specific task at hand. Whether you need precision for intricate work or more power for tougher jobs, this tool provides the flexibility to meet those needs. Additionally, a built-in LED light offers improved visibility, allowing for more precise work in dimly lit areas.

Portability is another significant characteristic of the Harbor Freight Tools 40318. Weighing in at a lightweight design, it can be easily transported from job site to job site without causing fatigue. Its compact dimensions also mean that it can be conveniently stored without taking up too much space, making it ideal for those with limited workshop areas.

The construction of the 40318 emphasizes reliability, as it is made from high-quality materials that resist wear and tear. This attention to durability ensures that users can depend on the tool for years to come. Moreover, the ergonomic grip has been designed to minimize strain during extended use, making working with the tool comfortable and efficient.

In conclusion, the Harbor Freight Tools 40318 combines power, versatility, and ease of use, making it a valuable addition to any toolbox. With its robust motor, adjustable settings, portable design, and ergonomic features, this tool is well-suited for a wide range of applications. Whether you’re a seasoned professional or a hobbyist, the 40318 stands out as an excellent choice for enhancing productivity in any project.
Top Page Image Contents