CAUTION: Do not attempt to start an auto- mobile engine with this generator. Voltage feedback from the running automobile may damage the genera- tor.
Note: The DC terminal may be used while the AC power is in use. An overload- ed DC circuit will trip the DC circuit protector (push button comes out).
If this happens, wait a few minutes before pushing in the circuit protector to resume operation.
11.Watch the Volt Meter to determine the current load on the generator. If the Volt Meter reading falls below 110 V~ (or the voltage requirement of attached devices), remove some devices from the system to reduce demand on the generator.
WARNING! To prevent serious injury from electric shock: Use the GFCI unit properly.
If the power supply to either duplex outlet is interrupted, there may be a short in the attached device’s wiring that is tripping the GFCI unit. Check all wiring connections carefully for moisture and damaged insulation before pressing the reset button.
If the GFCI unit trips again immediately or after a short while, discontinue use immediately and have the generator and the device attached to that outlet serviced by a qualified electrician.
Stopping the Generator
1.Turn OFF all attached devices.
2.Unplug the cords from the Generator.
3.Turn OFF the tractor engine.
SKU 65309 | For technical questions, please call | Page 11 |