Gravely 12031301, 12031302 manual Adjustment Of The Lengths Of Hoses, Attachment Of The Upper Hose

Page 13

2-11 Adjustment Of The Lengths Of Hoses

The hoses in steps 2-12 and 2-13 must be cut to fit your machine. Follow steps 2-12 and 2-13. Do not cut the hoses until you have tried to fit them on your machine. Remember that the hoses have to be long enough to allow for enough clamping surface between the inlet, blower assembly, and the deck boot.

2-12 Attachment Of The Upper Hose

Fasten the inlet to the plastic top by sliding the inlet from the inside of the top to the outside and lock into place. Slide a 5”-6” upper hose clamp P#(J6011) onto both ends of the 6” upper hose (Figure 21). Then slide one end of the 6” hose onto the inlet. Make sure there is about a two-inch overlap between the hose end and the container inlet. Proceed to slide the opposite end of the 6” hose onto the outlet of the blower assembly. See Figure 21 for details. Make sure both ends of the hose are clearly attached to the inlet and the blower assembly inlet. Tighten the hose clamps.

Figure 21.

Inlet

6” Upper

8” Lower

5”-6”

Hose

Hose

Clamp

 

 

 

Blower

 

 

Boot

Blower Cone

7”-8”

 

Clamp

2-13 Attachment Of The Lower Hose To The Blower Cone

Fasten the blower cone P#(E6009) to the blower housing by using (2) 5/16”-18 x 2-1/2” HHCS P#(K0125) and (2) 5/16”-18 jam nuts P#(K0120). Slide a 7”-8” hose clamp P#(J6006) over both ends of the lower hose. Then proceed to slide the lower hose onto the blower cone. Tighten the hose clamp. The assembly should look like Figure 21.

2-14 Attachment Of The Lower Hose To The Boot

Take the unattached end of the lower hose and slide it over the circular end of the boot. Use the lower hose clamp to secure the hose to the boot (Figure 21). Tip: Before securing clamp rotate hose counter-clockwise (away from yourself) approximately 1” to add in retaining boot to mower deck.

2-15 Front Weight Assembly

Attach each weight bracket P#(B0188) to the mower’s front casters by using (1) 3/4”-10 x 1-1/2” HHCS P#(K0364) and (1) 3/4”-10 nyloc nut P#(K1433) (Figure 22). When installing the 100 lb. weight you should have another person help position the weight onto a floor jack. Using the floor jack will make installing the weight much easier. Lift the weight up to the top of the weight brackets. Fasten the weight to the weight brackets by using (1) ½”-13 X 4-1/4” U-Bolt P#(K0331) and (2) ½”-13 flange nuts P#(K1246) per bracket. Once the weight is secure tighten all nuts. Be sure Weight is centered in

reference to the U-Bolts. Figure 22.

3/4”-10 X 1-1/2” HHCS 3/4”-10 Nylock Nut

Right

Left

Weight

Weight

Bracket

Bracket

 

Weight

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents $4.00 REV OPERATOR’S ManualPTO Grass Collection System Table of ContentsSafety Alert Symbol Safety Signs SafetyWhat is WARRANTED? Peco Limited Warranty for NEW ProductsSection Introduction and Description Installation for USEIntroduction DescriptionAttaching Frame Mount Brackets Attaching Muffler GuardSafety Interlock Harness Connection Carriage Bolt Exploded Parts View Parts View Cam Assembly Adjustment Belt InstallationAttachment Of Lower Frame To The Frame Brackets Attachment of Top Assembly To The Upper Frame Assembly Attachment Of Upper Frame Assembly To The Lower FrameAttachment Of The Boot To The Mower Deck Attachment Of The Lower Hose To The Boot Adjustment Of The Lengths Of HosesFront Weight Assembly Attachment Of The Upper HoseInstallation/Removal Collection Bags Section Operating Instructions Section MaintenanceParts And Service Information Section Parts and ServiceLubrication Safety Decals Page Page BOX Ppeco

12031301, 12031302 specifications

The Gravely 12031301 and 12031302 stand out as innovative solutions in the field of outdoor power equipment, particularly known for their performance and versatility in lawn care and landscaping tasks.

At the heart of both models is a robust and efficient engine. The Gravely 12031301 boasts a powerful engine that facilitates exceptional cutting performance, allowing users to tackle even the most challenging terrains. Similarly, the 12031302 is equipped with a state-of-the-art engine that ensures reliability and longevity, making it a favorite among both professional landscapers and avid gardeners.

One of the key features of these models is their cutting deck design. The Gravely 12031301 features a wide cutting deck that ensures an even and precise cut across various grass types. This model’s adjustable cutting height allows users to customize their mowing experience, ensuring their lawn is maintained to their preferred specifications. The 12031302 echoes this sentiment, offering a reinforced cutting deck that not only enhances durability but also improves overall cutting efficiency.

Both models utilize advanced technology for ease of operation. The user-friendly controls are strategically placed for intuitive use, allowing operators to navigate their tasks with minimal effort. Additionally, the ergonomic design of the handles provides comfort during longer operation sessions, reducing operator fatigue. The models also feature a smooth transmission system, enabling seamless speed adjustments and better overall maneuverability.

Fuel efficiency is another distinguishing characteristic of the Gravely 12031301 and 12031302. Designed with environmentally conscious users in mind, these models maximize fuel usage without compromising power. This efficiency translates to longer operating times between refills, a crucial aspect for professional users who require reliability throughout their workday.

Furthermore, both the 12031301 and 12031302 come with robust warranty options, reflecting Gravely's commitment to quality and customer satisfaction. The durable construction of these machines ensures they can withstand the rigors of frequent use, while the availability of replacement parts and service support reinforces their long-term value in the outdoor equipment market.

In summary, the Gravely 12031301 and 12031302 present an impressive array of features, technologies, and characteristics that cater to the needs of users seeking efficiency, ease of use, and reliable performance in their lawn care tasks. These models embody the balance of power and precision, making them indispensable tools for maintaining beautiful green spaces.
Top Page Image Contents