Gravely 890015* manual Storage, Troubleshooting

Page 9

INSPECT CATCHER PARTS

Before each use, inspect grass catcher parts for any holes, abrasions, or structural damage. Replace any worn or damaged parts.

CLEAN UNIT

Clear away grass build up in catcher before and after each use.

CHECK ENGINE OIL

Check engine oil before each use. See engine manual for instructions.

CHANGE ENGINE OIL

See engine manual for oil change schedule and instructions.

CHECK BELT

Check belt for wear and proper tension every 10 hours. Replace belt if worn or deteriorated.

To replace:

1.Remove belt guard.

2.Loosen four bolts and lock nuts holding blower to catcher weldment.

3.Loosen 3/8" jam nut.

4.Place new belt on grass pump drive pulley, idler and deck pulley.

5.Adjust tension.

6.Replace belt guard. To adjust tension:

1.Remove belt guard.

2.Loosen hardware securing bagger engine to weldment.

3.Loosen four bolts and lock nuts holding blower to catcher weldment.

4.Loosen 3/8" jam nut.

5.Turn the all-thread bolt until finger pressure of 5-10 lbs deflects the belt mid-section 1/4".

6.Move the engine closer to the power unit to loosen the belt. Move it away from the power unit to tighten the belt.

7.Tighten jam nut and engine bolts.

8.Replace belt guard.

LUBRICATE UNIT

Every 10 hours and before storage:

•Grease caster weldment.

CHECK ENGINE SPARK PLUG

Check and regap spark plug according to schedule in engine manual.

STORAGE

WARNING: AVOID INJURY. Read and understand Storage Safety Rules in Safety section before operating.

IMPORTANT: NEVER spray unit with water. DO NOT store unit outdoors.

Clean plastic surfaces with sponge and mild detergent. Dry with a soft cloth.

Remove all debris from can and hoses before storing.

Remove all dirt, grease, leaves, etc. from unit.

Store in a clean, dry area.

Ensure all fasteners are properly tightened. Inspect moving parts for damage and wear.

Touch up all rusted or chipped painted surfaces.

TROUBLESHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTION

 

 

 

 

 

 

 

 

 

 

Catcher fails to pickup

1.

Grass can is full.

1.

Shut off engine, remove key and empty

grass or leaves.

2.

Catcher is clogged.

 

grass can.

 

 

 

 

3.

Deck is clogged.

2.

See Unclogging Grass Catcher in

 

 

Operation.

 

4.

Mowing too fast for conditions.

 

 

3.

Remove clog according to deck’s

 

 

 

 

 

 

 

Operator Manual.

 

 

 

4.

Mow slower.

 

 

 

 

 

Impeller stops or

1.

Worn or damaged belt.

1.

Replace belt.

slows.

 

 

 

 

 

 

 

 

 

GB - 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Promaster 310 Grass Catcher Introduction Table of ContentsSafety Operational Safety Rules Assembly Safety RulesStorage Safety Rules Maintenance and Service Safety RulesFuel Safety Rules Accessory and Attachment Safety RulesAssembly AssemblyOperation Maintenance Schedule MaintenanceStorage TroubleshootingModel Model Blower Assembly Disclaimer of Further Warranty Year Limited WarrantyGravely

890015* specifications

The Gravely 890015* is a sophisticated lawn mower that stands out in the landscape of commercial and residential turf care solutions. Designed to meet the demands of both professional landscapers and homeowners with large yards, this mower combines durability, efficiency, and cutting precision.

One of the key features of the Gravely 890015* is its powerful engine. Equipped with a robust engine option, it delivers high torque and impressive horsepower, thereby ensuring that even the most challenging mowing tasks are completed with ease. This power translates into faster mowing speeds, reducing the overall time spent on lawn maintenance.

The cutting deck of the Gravely 890015* is engineered with precision. The mower features a wide cutting surface that allows users to cover more ground in less time. It is designed to produce a clean and even cut, which enhances the overall aesthetic of the lawn. With an adjustable cutting height, users can easily customize the mowing process according to the specific needs of their turf, ensuring optimal results throughout different seasons.

Innovation sets the Gravely 890015* apart from its competitors. The mower integrates advanced technologies such as a smart cooling system that helps to prevent overheating during extended use. This feature not only extends the life of the engine but also enhances performance on hot, sunny days when lawns typically require more frequent mowing.

In addition, the Gravely 890015* prioritizes user comfort. The ergonomic seat, coupled with vibration-dampening technology, ensures a smooth ride even over rough terrains. Easy-to-reach controls allow the operator to adjust speeds and cutting height without having to leave the seat, making the mowing experience more efficient and enjoyable.

Durability is another hallmark of the Gravely brand, and the 890015* model is no exception. Constructed with high-quality materials that resist wear and tear, this mower can withstand the rigors of daily use. The robust frame and heavy-duty components promise reliability, making it a worthwhile investment for anyone serious about lawn care.

In summary, the Gravely 890015* encapsulates performance, innovative technology, and user-driven design. With its powerful engine, wide cutting deck, and focus on durability and comfort, this mower is an excellent choice for those looking to achieve a pristine lawn with minimal effort. Whether for residential use or commercial landscaping, the Gravely 890015* represents a smart solution for all mowing needs.
Top Page Image Contents