Gravely 89201800 manual Adjustment Of The Lengths Of The Hoses, Attachment Of The Upper Hose

Page 13

Mower Deck

Figure 18

Deflector Shield Mount

Boot Hanger

Notch

6” hose onto the outlet of the blower assembly. See Figure 19 for details. Make sure both ends of the hose are clearly attached to the inlet and the blower assembly inlet. Tighten the hose clamps.

Boot Plate

Boot Rod

Boot

2-11 Adjustment Of The Lengths Of The Hoses

The hoses in steps 2-12 and 2-13 must be cut to fit your machine. Follow steps 2-12 and 2-13. Do not cut the hoses until you have tried to fit them on your machine. Remember that the hoses have to be long enough to allow for enough clamping surface between the inlet, blower assembly, and the deck boot.

2-12 Attachment Of The Upper Hose

Slide a 5”-6” upper hose clamp P#(03022400) onto both ends of the 6” upper hose (Figure 19). Then slide one end of the 6” hose onto the inlet. Make sure there is about a two-inch overlap between the hose end and the container inlet. Proceed to slide the opposite end of the

Figure 19 Hose Assembly

Inlet

Upper Hose

Lower Hose

Boot

2-13 Attachment Of The Lower Hose To The Blower Cone

Slide a 7”-8” hose clamp P#(03022400) over both ends of the lower hose. Then proceed to slide the lower hose onto the blower cone. Tighten the hose clamp. The assembly should look like Figure 19.

2-14 Attachment Of The Lower Hose To The Boot

Take the unattached end of the lower hose and slide it over the circular end of the boot. Use the lower hose clamp to secure the hose to the boot (Figure 19). Tip: Before securing clamp rotate hose counter-clockwise (away from yourself) approximately 1” to add in retaining boot to mower deck.

2-15 Front Weight Assembly

Place (1) weight bracket P#(00195300) over each front caster. Fasten each weight bracket to the front caster loosely, by using (1) 3/8”-16 x 3-1/2” u-bolt P#(07068600) and (2) 3/8”-16 flange nuts P#(06542000) per bracket. When installing the 100 lb.weight you should have another person help position the weight onto a floor jack. Using the floor jack will make installing the weight much easier. Lift the weight up to the bottom of the weight brackets. Fasten the weight to the weight brackets by using (1) ½”-13 u-bolt P#(07068700) and (2) ½”-13 flange nuts P#(06543600) per bracket. Once the weight is secure tighten all nuts. See Figure 20 for more detail.

Figure 20 Weight Assembly

 

Weight

 

 

Front Caster

Weight

Bracket

 

 

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator S Manual PTO Grass Collection System Table of ContentsSafety Alert Symbol Safety Signs SafetyWarranty Section Introduction and Description Installation for USEIntroduction DescriptionAttaching Lower Frame Legs Safety Interlock Harness ConnectionSafety Interlock Harness Connections Handle Attaching The Aluminum Grass Container To The Unit Adjusting The Dump MechanismAluminum Grass Container Inlet Attachment Exploded Parts View Parts View Attachment Of The Boot To The Mower Deck Belt InstallationCam Assembly Adjustment Attachment Of The Lower Hose To The Boot Adjustment Of The Lengths Of The HosesFront Weight Assembly Attachment Of The Upper HoseSection Operating Instructions Section MaintenanceParts And Service Information Section Parts and ServiceLubrication Safety Decals Page Gravely

89201800 specifications

The Gravely 89201800 is a top-of-the-line commercial-grade mower designed to meet the demands of professional landscapers and homeowners alike. Known for its impressive durability, performance, and innovative technologies, this mower stands out in the heavy-duty mowing equipment category.

One of the key features of the Gravely 89201800 is its robust engine. Powered by a reliable Kohler or EFI engine, it delivers exceptional horsepower and efficiency, enabling it to handle tough mowing conditions without compromising performance. The engine is designed for easy starting and low maintenance, which reduces downtime and enhances productivity in the field.

Another significant characteristic of the Gravely 89201800 is its cutting deck. The mower typically features a 60-inch or 72-inch cutting deck made from high-quality steel, providing durability and improved cut quality. The deck is designed with a deep profile that enhances airflow, resulting in superior grass discharge and a clean, even cut. The adjustable deck height allows users to customize the cutting length, making it versatile for various landscaping needs.

The Gravely 89201800 also includes advanced technology for optimal performance. The mower is equipped with a zero-turn radius capability, enabling users to maneuver with precision around obstacles such as trees, flower beds, and fences. This feature significantly reduces the time needed for mowing large areas and ensures a professional finish.

In terms of comfort, the Gravely 89201800 is designed with the operator in mind. It features a plush seat with ergonomic design and ample cushioning, allowing for long hours of operation without discomfort. The control panel is intuitive and easy to use, further enhancing the overall user experience. Additionally, the mower is built with vibration-reduction technology, minimizing fatigue while operating on rough terrain.

Safety is a top priority in the design of the Gravely 89201800. The mower comes equipped with an emergency brake system, ensuring that it remains stationary when not in operation. The engine shut-off mechanism is also included, providing an additional layer of safety for users.

In summary, the Gravely 89201800 is a powerful, efficient, and innovative mower that combines advanced technology, comfort, and safety features. Its robust engine, superior cutting deck, zero-turn capabilities, and user-friendly design make it a top choice for both professional landscapers and dedicated homeowners seeking high performance and reliability in their mowing equipment.
Top Page Image Contents