2-8 Motor Mount Arm Installation
Slide the motor mount arm assembly P#(A0006) (Figure
11)into the outer motor mount tube. Secure the motor mount arm assembly using (1) detent pin P#(J0248).
Figure 11
Detent Pin
2-9 Engine/Blower/Blade Assembly Installation
Place the engine/blower/blade assembly onto the motor mount arm assembly (Figure 12). Secure the engine/blower blade assembly to the motor mount arm assembly using (4)
Figure 12
5/16" x
2-10 Attaching The Boot To The Mower Deck
Mounting The Boot Hanger
Remove the mower’s deflector shield mount (Figure 13). Place the boot hanger P#(B0117)
60” & 72” Boot Plate Mounting Instructions To mount the boot plate P#(B0204) to the boot P#(E1034(60”) E0006(72”)) use (3)
52” Boot Plate Mounting Instructions
To mount the boot plate P#(B0190) to the boot P#(E1113) use (2)
Note: Make certain when bolting the boot and boot plate together, that the head of the bolt is placed from the inside of the boot. This will prevent grass from collecting on the bolts.
For All Deck Sizes Remove the bolts that hold the deflector shield in place so that the boot rod can fasten the boot and boot plate to the mower deck. Align the holes in the boot plate to the holes in the deflector shield mount and slide the boot rod P#(B2540(60” & 72”) B0189(52”)) through and fasten using (1) hair pin clip P#(K0099).
Note: The Mower’s Deflector Shield Has Been Removed In The Following Photos For Clarity. Always have the deflector shield mounted when mowing.
Mower Deck
Figure 13
Deflector Shield Mount
Boot Hanger
Boot Plate | Boot |
9