Global Machinery Company RL 500 Emptying the grass catcher bag, Replacing the blades

Page 10

3.To safely operate the mower ensure all four wheels are on the ground and be careful not to loose your footing or control of the mower. Be very careful when mowing uneven or rough ground. Keep a firm grip on the handle bar at all times, always walk, never run with the mower.

4.For healthy growth, grass should not be cut too short. This can cause damage to the grass and allow weeds to develop.

5.Vary your cutting pattern from week to week, this will help to prevent matting and graining of the grass.

6.Before checking a clogged mower deck stop the engine completely and disconnect the spark plug cover and then tilt the mower so the air filter side is facing upwards. Use a stick the clear any clogged material, never use your hands.

7.Mowing wet grass should be avoided. Wet grass will clog the mower deck and if it is slippery you may loose your footing.

8.Always mow across slopes not up and down them. Be extra careful if the grass is wet as this could cause you to slip and loose control of the mower.

9.If the ground is to dry, mowing will stir up a lot of dust which may clog the air filter. In these conditions it is recommended to water your lawn the day before mowing.

10.Use the side of the mower as a guide to cut close to large objects such as a fence or a wall. Be careful when mowing over obstacles embedded in the lawn such as sprinkler systems and paving, avoid anything that sticks up above the surface of the lawn.

11.Avoid mowing over loose stones, gravel and other landscaping material as this can be picked up by the mower and flung out causing serious personal injury.

12.If the blades do come into contact with something or the mower starts to vibrate stop the engine immediately, remove the spark plug cover and inspect to see if there is any damage.

Emptying the grass catcher bag

Note. Before making any adjustment or maintenance procedures to the mower ensure it is turned off and the spark plug cover is removed.

1.To remove the catcher, raise the discharge guard, grab the catcher by the handle and lift it off the bar.

2.Empty the grass from the catcher by holding it vertical, shake it if necessary to dislodge the full contents.

Grass catcher maintenance

Warning. Check the catcher bag frequently for damage or wear, and replace it if worn.

The fabric grass catcher requires air to flow through the fabric for effective grass collection.

Wash it if necessary to restore the open mesh in the fabric.

Do not leave the fabric bag in direct sunlight, prolonged sun exposure can cause permanent breakdown of the material.

Do not leave clippings in the catcher for extended periods.

Replacing the blades

Note. Before making any adjustment or maintenance procedures to the mower ensure it is turned off and the spark plug cover is removed.

Note. Wear heavy gloves to protect your hands.

1. Tilt the mower back so the spark plug is facing up.

2

 

3

 

 

 

2.Remove the blade disc with a spanner to remove the central blade bolt first.

3.Remove all 4 single blades including the washer and nuts.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 75HP Contents Introduction Description of symbolsDear Customer Environmental protectionTraining SpecificationsSafety rules for petrol lawn mowers PreparationStop the engine Maintenance and storageBefore refuelling Check the blade’s balance after sharpening Contents of cartonUnpacking Damaged blades and worn bolts are major hazardsKnow your product Fuelling AssemblyCutting height adjustment Attaching the grass catcher bagStarting the engine Mowing adviceChecking the oil Stopping the engineEmptying the grass catcher bag Grass catcher maintenanceReplacing the blades Maintenance Clean dirt and grass from around the blade mounting areaSave this Manual for future reference

RL 500 specifications

The Global Machinery Company RL 500 is a cutting-edge industrial machine designed to meet the rigorous demands of today’s fast-paced manufacturing environment. Engineered for versatility, efficiency, and precision, the RL 500 has become a benchmark in the industry since its introduction.

One of the standout features of the RL 500 is its robust build quality. Constructed from high-grade materials, this machine is designed to withstand heavy use and the rigors of a demanding production line. Its durable exterior not only enhances its longevity but also ensures that it maintains high performance standards over time.

The RL 500 is powered by an advanced, energy-efficient motor that provides exceptional torque and speed. This motor technology significantly reduces operational costs while delivering increased power output, allowing for faster cycle times and improved productivity. The machine can effortlessly handle a variety of tasks, from precision machining to heavy-duty cutting applications.

Incorporating the latest advancements in automation, the RL 500 comes with a state-of-the-art programmable logic controller (PLC) that streamlines operations. This technology enables users to easily customize machine settings for varying production requirements, facilitating quick changeovers and minimizing downtime. The intuitive user interface simplifies operation, making it accessible even for less experienced personnel.

The RL 500 also features advanced safety mechanisms, including emergency stop functions and protective coverings. These safety measures ensure that operators can work with peace of mind, knowing that the machinery is equipped to handle potential hazards.

Moreover, the RL 500 is compatible with Industry 4.0 practices, offering IoT connectivity for real-time monitoring and data analytics. This feature allows manufacturers to track performance metrics and detect issues before they escalate, leading to proactive maintenance and optimized production workflows.

Another notable characteristic is the machine's adaptability to various materials. Whether it be metals, plastics, or composites, the RL 500 provides versatile performance across a range of industries, from aerospace to automotive and beyond.

In conclusion, the Global Machinery Company RL 500 epitomizes modern industrial engineering. With its robust design, energy efficiency, advanced automation, and adaptability, it represents a significant advancement in manufacturing technology, enabling businesses to enhance productivity, ensure safety, and remain competitive in a global market. The RL 500 is more than just a machine; it is a valuable partner in achieving operational excellence.
Top Page Image Contents