Global Machinery Company 1700W instruction manual

Page 6

position.

Thoroughly inspect the mower for loose or damaged parts before each use. Visually inspect to see that blades, blade bolts and the cutter assembly are not worn or damaged. Do not use the unit until adjustments or repairs are made.

Use only the manufacturer’s recommended replacement parts and accessories.

Always disconnect the mower from the mains when leaving it unattended.

Switch the motor off and pull out the plug when the machine is not being used, being cleaned, being moved from one place to another or when the blades are being changed or adjusted.

If there is an interruption to the power supply or the extension cable is damaged, switch off the machine immediately and remove the plug from the power point.

Inspect and maintain the mower regularly. Have the mower repaired only by an authorised repairer.

If power cord is damaged, only have it repaired or replaced by an authorised service centre.

Check that all grass cuttings and dirt have been removed from the ventilation vents.

When not in use, store the mower out of the reach of children and infirm people.

WARNING. In order to reduce the risk, disconnect the plug from the supply power, only use recommended accessories as required, otherwise personal injury may result.

Do not use the machine to cut grass which is not on the ground. For example, do not cut grass which is on rocks.

Do not switch on the machine in enclosed or poorly ventilated spaces or in the presence of inflammable and/or explosive substances such as liquids, gasses and powders.

Always stop the mower and switch off at the mains when cutting is delayed, emptying the grass box or when walking from one cutting location to another.

Do not cross roads or gravel paths with the machine still running.

Do not move the machine by pulling on the electrical cable. Always use the handgrip.

Keep a balanced and stable stance while using the machine.

Ensure that the area being cut is free from stones, sticks, wires, bones, and other foreign objects. Remove any objects that could be thrown during cutting or could wind around the cutting mechanism.

If you hit or become entangled with a foreign object, or the appliance starts to vibrate abnormally, stop the motor and disconnect from the mains immediately to check for damage. Repair any damage before further operation is attempted. Do not operate the mower with loose or damaged parts.

Do not cut against hard objects. This could cause injury to the operator and damage to the machine.

Keep your hands, face and feet away from all moving parts.

If possible, avoid cutting wet grass.

Exercise proper caution when mowing on sloping ground. Watch your footing and wear non-slip footwear. Mow along the slope not up and down it. Do not mow on steep slopes. Be especially cautious when changing direction on slopes – stand above the mower to avoid risk of injury.

Never operate the mower barefoot or when wearing open sandals or canvas shoes.

Do not mow by pulling the machine towards you.

When mowing, keep the cable away from the mower. Your direction of work should be away from the power point. Mow in straight lines, not in circles.

6

Image 6
Contents 1700W Rotary Collect Mower Contents Introduction Description of symbolsSpecifications Environmental protectionGeneral safety rules Electrical safetyAdditional safety rules for lawn mowers Page Unpacking Know your product Setting up Adjusting the Cutting Height Height Adjustment with Blue Spacer RemovedBefore Starting Emergency Stop MowingEmptying the Grass BOX Changing the Mower BladeCleaning the Filter MaintenanceCleaning Power Cord MaintenancePage GMC customer assist