Global Machinery Company PCH37 instruction manual Starting the chainsaw, Adding chain oil

Page 11

Adding chain oil

WARNING. Never start work unless the chain and bar are lubricated.

1.Place the chain saw on its side with the oil cap facing up. Untwist and remove the oil tank cap (23).

2.Fill the tank to 80% capacity with chain oil.

3.Fasten the cap and wipe up any oil spillage.

Starting the chainsaw

WARNING. Do not start the motor whilst the saw hangs from one hand. This is very dangerous as the chain may come in contact with your body.

1.Fill the fuel and oil tanks respectively and tighten the caps securely.

2.Set the on/off switch (19) to On (the I position). Make sure that the chain brake is released by pulling the front guard (9) towards the rear of the saw.

3.When the machine is cold first pull out the choke control (18)

to the CHOKE position. (Fully withdrawn).

NOTE. Once the choke control has been pulled out, it cannot be pushed back to the run position. It returns automatically when the trigger switch is operated.

4.Hold the chain saw securely on the ground and pull vigorously on the recoil starter

(14).Repeat (at least 15 times) until the engine “kicks” (attempts to start).

5.With the lock off switch

(21)held depressed slightly pull on the trigger switch (20) and then release it. The choke control will click back one position.

6.Pull the recoil starter (14) again and restart the engine. Allow the engine to warm up.

7.When the engine is warm first depress the lock off switch

then pull fully on the trigger switch for a short burst. The choke control will fully retract to the RUN position, your chainsaw is now ready for use.

8.When restarting the engine when it is still warm, set the choke control to the START position. Hold the chain saw securely on the ground and pull vigorously on the recoil starter (14). Allow the engine to run for a few moments with the trigger switch pulled slightly.

9.When the engine is fully warm, pull on the trigger switch. The choke control will fully retract to the RUN position.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Petrol Chainsaw Contents Environmental protection Description of symbolsDear Customer IntroductionSpecifications Symbols on the machineGeneral safety instructions Use the chain saw holding it firmly with both hands Additional safety rules for petrol chain sawsUnpacking Contents of cartonKnow your product Installing the guide bar and chain Fuelling the chain saw Filling up with fuel and oilMixing fuel 501 mixing ratio Adding chain oil Starting the chainsawChain Brake Adjusting the carburettorStopping the chainsaw Checking the oil supplyHelpful hints Operating in cold temperaturesOperation Limbing Guard against kickbackFelling a tree Pruning MaintenanceMaintenance to be preformed after each use BuckingGuide bar wear Chain sharpeningPage Page Page Save this Manual for future reference GMC Head Office

PCH37 specifications

Global Machinery Company (GMC) has earned a reputation as a leading player in the manufacturing sector, particularly with its innovative product, the PCH37. This advanced machine integrates state-of-the-art technologies and engineering expertise, making it a cornerstone for various industrial applications.

The PCH37 is designed with a robust framework that ensures durability and reliability in demanding environments. One of the standout characteristics of this machine is its flexible architecture, allowing it to be easily customized for a wide range of tasks. This versatility makes it suitable for sectors such as construction, manufacturing, and materials handling.

At the heart of the PCH37 is its intelligent automation system. It employs advanced sensors and machine learning algorithms that enable real-time monitoring and adjustments, enhancing the efficiency of operations. This technology not only improves productivity but also reduces wastage, making it an environmentally sustainable choice. Operators benefit from an intuitive interface that simplifies control, ensuring that even those with minimal experience can quickly adapt to using the machine.

Moreover, the PCH37 is equipped with cutting-edge powertrain technology. Its hybrid engine system combines electric and hydraulic components, optimizing energy consumption while maintaining high performance. This feature aligns with global trends towards greener technology, as it significantly lowers the carbon footprint during operation.

Safety is paramount in the design of the PCH37. It includes comprehensive safety features such as automatic shut-off mechanisms, emergency stop buttons, and reinforced structures that protect operators and nearby personnel. GMC also prioritizes operator training, ensuring that users are well-versed in safety protocols and machine functionality.

In terms of maintenance, the PCH37 is engineered for accessibility. With strategically placed service points and a self-diagnostic system, routine checks and repairs can be conducted with minimal downtime. This maintenance approach translates into lower operational costs and prolonged machine lifespan.

Overall, the Global Machinery Company PCH37 is a testament to innovative engineering, blending cutting-edge technology with user-friendly design and sustainability. Its main features, including intelligent automation, hybrid power, and robust safety protocols, underscore GMC's commitment to excellence in the industrial machinery sector. As industries continue to evolve, the PCH37 stands ready to meet the challenges of tomorrow while delivering reliable performance today.
Top Page Image Contents