GBC 5570X warranty Set Up

0		4
	SET UP
	Caution! Shredders are heavy equipment (see
	!￿ “Total Unit	Weight” in the “Specifications”
	section of this Manual). To insure proper
	installation and avoid injury, GBC recommends that
	two people set up this unit.
	FIGURE 1. Begin by opening the cabinet door by
	pulling the handle. Place the shredder head onto
	the top of the cabinet as illustrated.
	FIGURE 1
	FIGURE 2. Insert the enclosed plastic bag in the
	pull-out waste receptacle. First, pull out the waste
	receptacle (1) and remove the red round belt (2).
	Turn over the top of the bag several times (3),
3	insert the plastic bag in the waste receptacle and
	fasten with the round belt (4). Push the waste
	receptacle into the cabinet and close the cabinet
	door (5).
1
2	4
	5
	FIGURE 2