Assembly
Pedal Hubs
Pedal Axle
Assembly
Front Wheel
5
•While holding the pedal hubs on the pedal axle assembly, insert the pedal axle through the hole in the center of the front wheel.
•Push the pedal hubs into the center of the front wheel until they are fl ush with the surface of the front wheel.
7
Pedal
Pedal Axle
Scrap Block
of Wood
Pedal Hub
Pedal Hub
6
•Turn the front wheel assembly over.
•Insert the remaining pedal hubs on top of and below the pedal axle and into the hole in the center of the front wheel.
•Push the pedal hubs into the center of the front wheel until they are fl ush with the surface of the front wheel.
•Fit the pedal on the pedal axle. Tap the pedal with a hammer until it is secure.
•Pull the pedal up to be sure it is secure. If you can remove it, you have not secured it properly. Tap it with the hammer again.
Fork Arms
Fork Cover
Groove
8 | Pedal Axle |
•Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm.
•Place a fork cover over the pedal axle on one fork arm.
•Insert two #8 x 3/4" (1,9 cm) screws into the fork cover and tighten.
•Repeat this procedure to attach the other fork cover to the other fork arm.
4