Faber Remote Blower guide

This appliance should be connected directly to the fused disconnect (or circuit breaker) through flexible, armored or nonmetallic sheathed copper cable. Allow some slack in the cable so the appliance can be moved if servicing is ever necessary. A UL Listed, 1/2" conduit connector must be provided at each end of the power supply cable (at the appliance and at the junction box).

When making the electrical connection, cut a 1 1/4" hole in the wall. A hole cut through wood must be sanded until smooth. A hole through metal must have a grommet.

SUITABLE FOR USE WITH SOLID STATE SPEED CONTROLS. WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

CAUTION: For General Ventilating Use Only. Do Not Use To Exhaust Hazardous or Explosive Materials and Vapors.

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Installation Work And Electrical Wiring Must Be Done By Qualified Person(s) In Accordance With All Applicable Codes And Standards, Including Fire-Rated Construction.

Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

!WARNING

•Electrical ground is required on this rangehood.

•If cold water pipe is interrupted by plastic, nonmetallic gaskets or other materials, DO NOT use for grounding.

•DO NOT ground to a gas pipe.

•DO NOT have a fuse in the neutral or grounding circuit. A fuse in the neutral or grounding circuit could result in electrical shock.

•Check with a qualified electrician if you are in doubt as to whether the rangehood is properly grounded.

•Failure to follow electrical requirements may result in a fire.

Remote Blower specifications

The Faber Remote Blower is a cutting-edge solution designed to enhance the efficiency, performance, and aesthetics of kitchen ventilation systems. Renowned for its innovative engineering, this remote blower system offers numerous features that make it a preferred choice among discerning homeowners and culinary enthusiasts.

One of the primary features of the Faber Remote Blower is its quiet operation. The advanced sound-reduction technology ensures that the blower operates at minimal noise levels, allowing for an uninterrupted cooking experience. This is particularly beneficial in open floor plan designs where kitchen sounds can easily travel to living or dining areas.

Another distinctive characteristic is the blower’s powerful performance. Faber remote blowers are engineered to deliver exceptionally high air extraction capabilities. This means they can effectively eliminate smoke, odors, and other airborne contaminants, ensuring a cleaner and healthier kitchen environment. The blower's adjustable speed settings allow users to fine-tune the extraction power according to their cooking needs, promoting versatility and efficiency.

The Faber Remote Blower also boasts a sleek and minimalist design that blends seamlessly with the overall kitchen aesthetic. Its compact design allows for flexible installation options, including placement in various locations such as the attic or on a roof, completely disentangling the blower from the visual aspect of kitchen appliances. This is particularly appealing to modern homeowners who seek to maintain a clean and elegant appearance in their spaces.

In terms of technology, the Faber Remote Blower integrates smart features such as remote control operation, allowing users to adjust settings from a distance conveniently. Many models include an automatic shut-off feature, which activates after a set period, promoting energy conservation and ease of use.

Furthermore, the build quality of Faber Remote Blowers emphasizes durability and longevity. Constructed with high-grade materials, these blowers are designed to withstand the rigors of daily use while providing consistent performance over time.

In summary, the Faber Remote Blower stands out for its silent yet powerful operation, stylish design, and advanced technological features that enhance the overall cooking experience. With a focus on efficiency and aesthetic appeal, this remote blower is an excellent investment for anyone looking to elevate their kitchen ventilation system. Whether you're an avid home cook or simply want a more pleasant kitchen environment, the Faber Remote Blower is an exceptional choice that meets diverse needs and preferences.