Model: V1725H
4.8 Volt DC
1. | Sweeper Power Head | 7. | Charging Jack |
2. | On / Off Switch | 8. | Lower Handle |
3. | Charging Light Indicator | 9. | Metal Extension Handles |
4. | Dust Cup (Container) | 10. | Upper Handle |
5. | Rotating Brush | 11. | Charging Adapter: Use Only |
6. | Transparent Brush Cover |
| TechWorld |
Illustrations may differ from actual product.
NOTE: Cordless Sweeper Model V1725H is shipped with the batteries uncharged. Charging of the unit for 20 hours prior to first use is required. Use replacement battery
#X9725H only.
Battery Removal & Disposal
NOTE: If uncertain as to how to remove your battery pack, we suggest you take your sweeper to a reputable small appliance service technician to have this service performed.
Follow these steps when battery removal is required.
This sweeper is equipped with
WARNING: You must never use ordinary batteries for replacement as these may leak and cause damage. Use only battery pack X9725H provided by
Removal of Battery Pack
1.Remove the extention handles and dust cup container.
2.Turn unit over so that the base is facing upwards. Be careful not to turn the unit ON. (Fig. 9)
3.Push in locking tab and lift off battery compartment cover. (Fig. 10)
4.Lift out battery pack and set aside.
5.Insert the new battery pack into unit, ensuring that the Positive (+) terminal of the battery pack corresponds with the positive (+) making inside the battery compartment. Replace the battery compartment cover making certain that the locking tab snaps in place.
IMPORTANT: This appliance contains
Locking
Tab
Fig. 9 | Fig. 10 |
7
2