How to Wire Your Ceiling Fan, Stud | Emerson CF240ATB00 instruction

BP7359 VININGS CF240 9/19/07 11:13 AM Page 11

How to Wire Your Ceiling Fan

including ground, and that no bare wire is visible at the wire connectors, except for the ground wire.

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

CAUTION: To reduce the risk of electrical shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver.

1. Position the supply wires to the left side of the outlet box (Figure 14); position the fan wires to the right side. Partially insert the remote control receiver (flat side up) until one end rests on the hanger ball as shown in Figure 14.

NOTE: Make all wiring connections using wire connectors (supplied). Make sure that all connections are tight,

2. Refer to Figures 14 and 15 and connect the receiver wires to the supply wires and the fan motor wires as follows:

a.Securely connect the green grounding wires from the hanger ball and the hanger bracket to the supply grounding conductor (this may be a bare wire or a wire with green insulation).

b.Securely connect the supply white (neutral) wire to the receiver white (AC IN N) wire.

c.Securely connect the supply black wire (hot) wire to the receiver black (AC IN

L)wire.

d.Securely connect the fan motor white wire to the receiver white (TO MOTOR

N)wire.

e.Securely connect the fan motor black wire to the receiver red (TO MOTOR L) wire.

f.Securely connect the fan motor blue wire to the receiver blue (FOR LIGHT) wire.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

	SUPPLY WHITE WIRE
	(NEUTRAL)
	AC
	I
	N	N
	SUPPLY BLACK	N
	SUPPLY BLACK
	WIRE (HOT)
	GROUND WIRE

GREEN GROUND

WIRE FROM

HANGER BALL

ANTENNA

GREEN GROUND

WIRE FROM

HANGER BRACKET

1-1/4" THREADED

Figure 14 STUD (2)

RECEIVER WHITE
WIRE	RECEIVER
	RECEIVER
	BLACK WIRE
				RECEIVER RED WIRE
						RECEIVER BLUE
						WIRE
					MOTOR	L
AC IN L	MOTOR	N			MOTOR
AC IN L			LIGHT
			LIGHT	TO
	TO		FOR	TO
	TO
FAN
FAN
BLACK
WIRE
FAN BLUE WIRE
FAN WHITE WIRE	RECEIVER WHITE WIRE
	RECEIVER WHITE WIRE

11	U.L. Model No.: CF240

CF240ATB00 specifications

The Emerson CF240ATB00 is a sophisticated ceiling fan designed to enhance the aesthetic appeal and comfort of any indoor space. With its sleek and modern design, this fan not only offers functionality but also serves as a stylish accessory that complements various décor styles.

One of the most notable features of the CF240ATB00 is its powerful motor. The fan is equipped with a high-performance AC motor that ensures optimal airflow while maintaining quiet operation. This is particularly important in residential spaces where noise can be disruptive. The motor is designed for longevity, contributing to the durability of the fan.

The CF240ATB00 boasts a 52-inch blade span, making it ideal for medium to large rooms. This size allows for efficient air distribution, providing a comfortable environment throughout the space. The fan's five elegantly crafted blades are designed aerodynamically to enhance airflow and minimize energy consumption.

Technology is a significant aspect of the Emerson CF240ATB00. The fan features a reversible motor which allows for year-round use. During the summer months, the fan can be set to run counterclockwise, creating a cooling breeze. In winter, reversing the motor allows the fan to push warm air down from the ceiling, helping to maintain an even temperature throughout the room.

Energy efficiency is another critical consideration in the design of the CF240ATB00. It is compliant with Energy Star standards, meaning it consumes less electricity compared to traditional ceiling fans. This not only helps in reducing energy bills but also contributes to environmentally friendly living practices.

The fan also includes adjustable speed settings, allowing users to customize airflow to their comfort level. With easy-to-use remote control options, operation of the fan is seamless and convenient, eliminating the need for manual adjustments.

In summary, the Emerson CF240ATB00 ceiling fan is a perfect blend of style, functionality, and technology. With its powerful motor, efficient design, and energy-saving features, it stands out as an ideal choice for those looking to improve the comfort and décor of their living spaces. Whether for a stylish living room, a cozy bedroom, or a spacious kitchen, the CF240ATB00 delivers on performance while making a statement in any environment.