Echo PE-280 specifications Lubrication, Gear Housing, Drive Shaft

Page 25

PE-280

MAINTENANCE

 

 

Note: Every unit is run at the factory and the carburetor is set in compliance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.

1.Check idle speed and reset if necessary. If a tachometer is available, idle speed screw (A) should be set to the specifications found on “Specifications” page of this manual. Turn idle screw (A) clockwise to increase idle speed; counter clockwise to decrease idle speed.

A

When carburetor adjustment is completed, the cutting attachment should not move at idle, otherwise serious personal injury may result.

Lubrication

Level 1.

Parts

POWER BLENDXTM 8 oz. or Lithium Base

Required:

Grease.

Note: Your debris shield may appear different than the debris shield shown.

Gear Housing

1.Remove plug (A) and add grease to gear housing. Do not over-fill.

2.Replace plug and tighten securely.

B

A

C

Drive Shaft

1.Loosen two (2) screws (B) and remove center locating screw (C). Pull gear box and shield from drive shaft housing.

2.Pull flexible cable from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] of grease.

3.Slide the flexible cable back in the drive housing. DO NOT get dirt on the flex cable.

4.Install the gear housing and shield assembly. Align locating screw hole with hole in drive shaft housing.

5.Tighten screws securely.

B

A

C

X7502310607

25

© 02/2014 ECHO Inc.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionAdditional or Replacement Manuals SafetyManual Safety Symbols and Important Information On / OFF International SymbolsPersonal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdEquipment EPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Drive Shaft/Power Head AssemblyThrottle Linkage and Ignition Leads Support Handle OperationFuel Handling Fuel Fuel RequirementsAfter use Starting Cold EnginePurge Bulb Starting Warm EngineOperation Techniques Stopping EngineOperation Maintenance Intervals MaintenanceSkill Levels Fuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemExhaust Port Cleaning Carburetor AdjustmentEngine Break-In High Altitude OperationLubrication Gear HousingDrive Shaft Blade Replacement Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements ECHO, Incorporated
Related manuals
Manual 32 pages 31.66 Kb

PE-280 specifications

The Echo PE-280 is a powerful, versatile string trimmer designed for both professionals and serious gardeners who demand reliability and performance. Known for its durability and innovative features, the PE-280 has become a favored choice in the market for landscaping and outdoor maintenance.

At the heart of the Echo PE-280 is its robust engine, a 28.1 cc 2-stroke that delivers impressive power and efficiency. This engine allows for exceptional cutting performance, enabling users to tackle thick grass, weeds, and brush with ease. The engine is designed for easy starting, which is a critical feature for professionals who need to get to work quickly without fussing over complicated starting procedures.

One of the standout characteristics of the PE-280 is its ergonomic design. It features a lightweight body, weighing just around 11.2 pounds, which minimizes user fatigue during extended periods of use. The trimmer is equipped with a comfortable handle that allows for precise control and maneuverability, giving users the ability to navigate tight spaces or trim along edges with great accuracy.

The PE-280 also incorporates a premium cutting system. It comes with a 17-inch cutting swath and is compatible with both string and blade attachments, making it adaptable for various tasks. The trimmer uses a rapid reload spool, allowing easy line replacement without the need for additional tools. This convenience is highly appreciated in commercial settings where time is of the essence.

Additionally, the Echo PE-280 is designed with user-friendly features such as an automatic rewind feature that helps to reduce downtime. The dual-line bump feed system ensures that users can quickly advance the cutting line simply by bumping the head on the ground, which is essential for maintaining efficiency.

Overall, the Echo PE-280 is engineered to deliver outstanding performance and user convenience. It combines powerful engine technology with ergonomic design and adaptive features, making it an excellent choice for both residential users and landscaping professionals. Its reputation for reliability and effectiveness ensures that it stands out in a crowded market, allowing users to achieve professional results every time they use it.
Top Page Image Contents