Echo PE-280 manual Power MEdger 21 perator s anual, Drive shaft lubrication

Page 21

OPower' MEdger 21 perator s anual

Level 2.

Parts required: None

NOTE

Every unit is run at the factory and the carburetor is set in compli- ance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.

1.Check idle speed and reset if necessary. If a tachometer is avail- able, idle speed screw (A) should be set to the specifications found on "Specifications" page of this manual. Turn idle screw (A) clockwise to increase idle speed; counter clockwise to decrease idle speed.

warning

When carburetor adjustment is completed, the cutting attachment should not turn at idle, otherwise serious personal injury may result.

A

drive shaft lubrication

Level 1.

Parts Required: POWER BLENDXTM 8 oz. (P/N 91014) or Lithium Base Grease.

1.Loosen two (2) screws (A) and remove center locating screw (B). Pull gear box and shield from drive shaft housing.

2.Pull flexible cable from the drive shaft housing, wipe clean and recoat with a thin coating [15 ml (1/2 oz.)] of grease.

3.Slide the flexible cable back in the drive housing. DO NOT get dirt on the flex cable.

4.Install the gear housing and shield assembly.

A

B

Image 21
Contents Power Edger Table of Contents Safety manualIntroduction Operators manualPower Edger Operators Manual Safety Manual Safety Symbols and Important InformationInternational symbols Eye Protection Physical ConditionHand Protection Proper ClothingRead the Manuals Repetitive Stress InjuriesEPA 2010 and Later and/or C.A.R.B. Tier EquipmentEmission Control exhaust & evaporative Hot Decal near muffler Shaft Decal Power Edger Operator s Manual DescriptionPage Contents AssemblyDrive shaft/power head Throttle linkage and ignition leads Front handle Power MEdger 11 perator s anualOperation FuelHandling Fuel Fuel RequirementsPurge Bulb Starting cold engineStopping engine Starting warm engineOperating techniques Maintenance Maintenance intervalsSkill level Foam Pre-filter Power Edger Operator s ManualDual Layer Air Filter Air filterCooling system Spark plugExhaust system Spark Arrestor ScreenCarburetor adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationDrive shaft lubrication Power MEdger 21 perator s anualBlade replacement/lubrication Power Edger Operators Manual Storage Long Term Storage over 30 daysModel PE-280 SpecificationsExceptions Warranty Statements99922201032 12/03/09 99922201033 Power MEdger 29 perator s anual Page Power MEdger 31 perator s anual Warranty registration Additional or replacement manuals ServiceServicing Information parts/serial number Echo consumer product support
Related manuals
Manual 32 pages 36.26 Kb

PE-280 specifications

The Echo PE-280 is a powerful, versatile string trimmer designed for both professionals and serious gardeners who demand reliability and performance. Known for its durability and innovative features, the PE-280 has become a favored choice in the market for landscaping and outdoor maintenance.

At the heart of the Echo PE-280 is its robust engine, a 28.1 cc 2-stroke that delivers impressive power and efficiency. This engine allows for exceptional cutting performance, enabling users to tackle thick grass, weeds, and brush with ease. The engine is designed for easy starting, which is a critical feature for professionals who need to get to work quickly without fussing over complicated starting procedures.

One of the standout characteristics of the PE-280 is its ergonomic design. It features a lightweight body, weighing just around 11.2 pounds, which minimizes user fatigue during extended periods of use. The trimmer is equipped with a comfortable handle that allows for precise control and maneuverability, giving users the ability to navigate tight spaces or trim along edges with great accuracy.

The PE-280 also incorporates a premium cutting system. It comes with a 17-inch cutting swath and is compatible with both string and blade attachments, making it adaptable for various tasks. The trimmer uses a rapid reload spool, allowing easy line replacement without the need for additional tools. This convenience is highly appreciated in commercial settings where time is of the essence.

Additionally, the Echo PE-280 is designed with user-friendly features such as an automatic rewind feature that helps to reduce downtime. The dual-line bump feed system ensures that users can quickly advance the cutting line simply by bumping the head on the ground, which is essential for maintaining efficiency.

Overall, the Echo PE-280 is engineered to deliver outstanding performance and user convenience. It combines powerful engine technology with ergonomic design and adaptive features, making it an excellent choice for both residential users and landscaping professionals. Its reputation for reliability and effectiveness ensures that it stands out in a crowded market, allowing users to achieve professional results every time they use it.