Echo CS-680 instruction manual Operation, Chain Lubricant

Page 16

Cap indication

Fuel/oil tanks are indicated by the following illustrations on the caps.

Fuel tank cap

Oil tank cap

CHAIN LUBRICANT

Proper lubrication of the chain while in operation reduces the friction between the chain and the guide bar to a minimum and assures a longer service life.

Use bar and chain oil of high quality for this purpose.

Do not use used or reclaimed oil to avoid various oiler problems.

Use ECHO bar and chain oil.

When ECHO bar and chain oil is not available: Use motor oil, etc.

Use bar and chain oil of the following grades: SAE No. 30 ....... in summer

SAE No. 10 ....... in winter or when cutting

resinous trees.

• When refueling, also refill chain oil.

OPERATION

Chain brake

Choke

WARNING

After choke control knob is pulled and then knob is returned to original position, throttle remains a little open (latch condition).

If engine is started in this latch condition, chain starts to turn. Do not start engine before chain brake is locked.

CAUTION

Throttle trigger lockout

Throttle trigger

Start / Run

Ignition switch

After starting the engine, squeeze throttle trigger slightly to release throttle latch and pull front hand guard towards the operator immediately.

(Chain brake unlocked position)

Never use throttle latch for cutting.

Use the chain brake only in starting or in emergencies.

Starter handle

Unlock chain brake

CS-680

14

Image 16
Contents Chain SAW Copyright Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationOther Safety Precautions Contents Symbols and SignsSymbol Form DecalsPacking List Nomenclature of Parts X505-002040 Part NumberChain tension adjuster Device to adjust chain tension Operator Safety Correct USE of Chain Brake Spark Arrestor MufflerGuide BAR and SAW Chain INSTALLATION/REMOVAL Preparation for USE Adjusting Chain Tension Fuel and Lubricant Fuel StatementHandling Fuel Mixing InstructionsOperation Chain LubricantWhen the Engine is Cold When the Engine is WarmRunning StoppingChecking Chain Tension Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing BuckingTesting the Brake Chain Brake OperationAutomatic Chain Brake Winter OperationGuide BAR Chain and Guide BAR CombinationSAW Chain Maintenance Intervals Maintenance and CareSkill Levels Carburetor Adjustment Cutting attachment must not move when unit is idlingAIR Filter Check Fuel SystmSpark Plug Fuel FilterSprocket Cylinder FinsMuffler Spark Arrestor Automatic OilerSetting the SAW Chain Setting SAW ChainCS-680 Troubleshooting Problem Cause RemedyTechnical Data Storage After USE
Related manuals
Manual 34 pages 51.84 Kb