SETTING THE SAW CHAIN
Preset tie strap
Drive link | Left hand cutter |
Right hand cutter
| Top plate |
| Side plate |
Guard link | Depth gauge |
Tie strap
Sharpen lower edge
Important points for proper maintenance of saw chain:
ss +EEP THE CUTTERS SHARP ATTALLRTIMES
ss+EEP THE LEFTHAND THEERIGHT CUTTERS PROPERLY aligned.
-Note that blunt or irregular cutters will result in poor cutting performance, increased vibration of chains and premature breakage of the saw chain.
ss$RIVEILINK SERVESNTO REMOVERSAWDUST FROM THE groove of the guide bar.
Keep the lower edge of the drive link sharp where indicated.
Keep this angle
25° 
Push file as shown
SETTING SAW CHAIN
ss&OROSETTINGESAWTCHAIN ROUND lLE AMM diameter 7/32 in.) and flat file are used.
ss4O KEEPKCORRECT POSITION AND CORRECT ANGLE IUSEN the file holder (Sure Sharp®).
10°
Hold the file tipped 10° upward
27 |
|