Carburetor Adjustment

Idle adjusting screw

High speed needle (H)

Low speed needle (L)

Every unit is run at the factory and the carburetor is set in compliance with Emission Regulations. In addition, the carburetor is equipped with “H” (High Speed) and “L” (Low Speed) needle adjustment limiters that prevent settings outside acceptable limits.

1.Before adjusting carburetor clean or replace air filter and muffler “Spark Arrestor Screen”.

2.Make sure the bar and chain are properly adjusted.

3.Start engine and run several minutes to bring to operating temperature. Flash choke twice during warm-up to clear any air from the fuel system.

4.Stop engine.

Turn “H” speed needle counterclockwise (CCW) to stop.

Turn “L” speed needle midway between full clockwise (CW) stop and CCW stop.

5.Idle Speed Adjustment:

•Start engine, turn “Idle” speed adjustment screw CW until the saw chain begins to turn, then turn screw out CCW until the saw chain stops turning.

Turn screw out, CCW, an additional 1/4 turn.

WARNING

Cutting attachment must not move when unit is idling.

6.Accelerate to full throttle for 2 - 3 seconds to clear any excess fuel in the engine, then return to idle.

Accelerate engine to full throttle to check for smooth transition from idle to high speed.

If engine hesitates turn “L” needle CCW 1/8 turn and repeat acceleration.

Continue adjustment until smooth acceleration results.

7.Check idle speed and reset if necessary as described in item 5. If a tachometer is available idle speed should be set to 2800 r/min.

CAUTION

When starting, idling adjustment speed should be adjusted not to rotate the saw chain. Correct idle speed is adjusted 2800 r/min. Or 1/4 turn CCW from the point the chain stops moving.

When you experience trouble with the carburetor, contact your dealer.

CS-600P

CS-600P specifications

The Echo CS-600P is a powerful and reliable chainsaw renowned for its performance and durability, making it a popular choice among professional loggers, landscapers, and arborists. This model is designed with user-friendly features and advanced technology to make cutting tasks efficient and straightforward.

One of the standout features of the Echo CS-600P is its robust 59.8cc professional-grade engine. This powerful engine delivers exceptional torque and cutting performance, ideal for felling trees, limbing branches, and cutting wood. The saw is equipped with a 20-inch bar and chain, providing a perfect balance of cutting capacity and maneuverability. The bar and chain system is designed for maximum cutting efficiency and low kickback, ensuring safe operation even in tricky situations.

The Echo CS-600P utilizes a patented Easy Start technology that reduces the effort needed to pull the starting cord. This feature significantly minimizes the frustration associated with starting a chainsaw, allowing users to get to work quickly. Additionally, the chainsaw incorporates an anti-vibration system that reduces operator fatigue, allowing for prolonged use without discomfort. This system absorbs shock from the engine and chain, making it more comfortable to operate over extended periods.

Safety is a crucial aspect of the Echo CS-600P design. It comes with a chain brake system that quickly stops the chain in case of kickback or operator mishap. The comfortable rear handle and front guard provide added protection, promoting safe handling during use. The saw's inertia-activated chain brake enhances safety further, making it an excellent choice for both seasoned professionals and novices alike.

The Echo CS-600P also boasts an ergonomic design with a lightweight frame, allowing for easy handling and transport. It features an adjustable oiler that ensures optimal lubrication of the chain, enhancing performance and prolonging the life of both the chain and bar. The transparent fuel tank allows users to monitor fuel levels at a glance, ensuring that they never run out of power in the middle of a job.

In summary, the Echo CS-600P is engineered for serious performance, safety, and user comfort. With its powerful engine, innovative features, and ergonomic design, this chainsaw stands out as a reliable tool that meets the demanding needs of professionals in the field. Whether tackling heavy-duty cutting tasks or small-scale projects, the Echo CS-600P is a versatile chainsaw that delivers consistent results.