Echo CS-620P instruction manual Preparation for USE, Kick Guard to BAR Instructions

Page 12

PREPARATION FOR USE

Bolt (A)

Front hole (B)

Dimple (D)

Kick Guard®

Front hole (C)

Recess (E)

Nut (F)

Guide bar

Unlock chain brake

Brake lever (Front hand guard)

Spiked bumpers

Two nuts

Clutch cover

Clutch

Guide bar studs

Clutch cover

 

Guide bar adjuster hole

Nuts

WARNING

Saw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result.

KICK GUARD® TO BAR

INSTRUCTIONS

Tools Needed: Two 11 mm (7/16 in.) Wrenches.

For saws with Kick Guard® P/N 2893201 and Symmetrical Low-Kick type (Double Guard) guide bars.

1.Install bolt (A) in front hole (B) of Kick Guard® and through front hole (C) in guide bar.

2.IMPORTANT: Dimple (D) in Kick Guard® must engage recess (E) in guide bar.

3.Tighten nut (F) and bolt (A) using 11 mm (7/16

in.) wrenches until snug. Make certain Kick Guard® is flush against guide bar.

4.Tighten nut (F) 1/8 additional turn.

5.Check to make certain Kick Guard® is tight on guide bar.

GUIDE BAR AND SAW CHAIN INSTALLATION/REMOVAL

1.Remove spark plug lead. (See page 25)

2.Remove two clutch cover nuts and remove clutch cover.

3.Remove bar and saw chain if necessary. See “Maintenance and Care” section for guide bar/ saw chain maintenance procedures.

4.Unlock the chain brake, and mount guide bar on studs and slide toward clutch to make saw chain installation easier. Install chain with cutters on top of guide bar facing forward.

5.Install the clutch cover over the guide bar studs. Ensure chain tension adjuster pin fits into the guide bar adjuster hole. Tighten clutch cover nuts finger tight.

CS-620P

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Chain SAW ECHO, IncorporatedCopyright 2013 All Rights Reserved Rules for Safe Operation CS-620POther Safety Precautions Contents Symbols and SignsSymbol Form StopDecals Guide bar Kick Guard Saw chain Warranty sheet Packing ListEcho chain saw Nomenclature of Parts Chain tension adjuster Device to adjust Operator Safety Correct USE of Chain Brake Spark Arrestor MufflerGuide BAR and SAW Chain INSTALLATION/REMOVAL Preparation for USEKick Guard to BAR Instructions Adjusting Chain Tension Fuel and Lubricant Fuel StatementEmission Data Handling FuelEmission Control Operation Chain LubricantCap indication Start / Run ChokeWhen the Engine is Cold When the Engine is WarmStart / Run Running StoppingChecking Chain Tension Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing BuckingTesting the Brake Chain Brake OperationChain brake function Chain brake unlockAutomatic Chain Brake Winter OperationStop the engine Low-kickback Replacement guide bars Chain and Guide BAR CombinationGuide BAR SAW ChainMaintenance and Care Maintenance IntervalsSkill Levels Carburetor Adjustment Cutting attachment must not move when unit is idlingHigh Altitude Operation AIR Filter Check Fuel SystemSpark Plug Fuel FilterSprocket Cylinder FinsMuffler Spark Arrestor Automatic OilerSetting the SAW Chain Setting SAW ChainCS-620P Troubleshooting ProblemCause Remedy Technical Data Storage After USEWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories CS-620P C26712001001/C26712999999

CS-620P specifications

The Echo CS-620P is a robust and versatile chainsaw designed for professional users and serious enthusiasts alike. It is renowned for its powerful performance and user-friendly features, making it a popular choice among forestry workers, landscapers, and agricultural specialists.

At the heart of the Echo CS-620P lies a powerful 59.8cc professional-grade, 2-stroke engine. This engine is engineered for efficiency, offering ample power to tackle a variety of cutting tasks, from felling large trees to limbing and bucking. The engine is equipped with a PureFire technology, which ensures lower emissions and improved fuel efficiency. This means users can work longer with fewer refueling stops, contributing to both cost savings and environmental sustainability.

One of the standout features of the CS-620P is its lightweight design, weighing only 13.2 pounds. This allows for enhanced maneuverability, reducing operator fatigue during extended use. The chainsaw also incorporates an ergonomic handle that provides a comfortable grip and better control, ensuring precise cutting even in challenging positions.

The CS-620P features a 20-inch bar and chain, allowing for a wide cutting capacity that can handle various log sizes. The chainsaw employs a heavy-duty, 3/8-inch pitch chain that is designed for fast cutting while maintaining durability. Additionally, the chainsaw includes a tool-less chain adjustment system, making it convenient to adjust the tension without needing additional tools.

Safety is a critical consideration in chainsaw design, and the CS-620P addresses this with features such as an inertia-type chain brake, which automatically stops the chain in the event of kickback. The chainsaw also includes a guide bar cover for protection and a rear hand guard that offers additional safety.

Maintenance is simplified thanks to the easy-access air filter and an automatic, adjustable oiler that ensures optimal lubrication of the chain and bar during operation. This prolongs the life of the equipment and enhances cutting performance.

Overall, the Echo CS-620P combines power, efficiency, and user-friendly design, making it an ideal choice for professionals who demand reliability and performance in their cutting equipment. Whether you are tackling heavy-duty landscaping projects or performing routine tree care, the CS-620P stands out as a trustworthy partner for all your cutting needs.
Top Page Image Contents