Echo SRM-266/S specifications Assembly, Plastic Shield Installation, Nylon Line Head Installation

Page 14

ASSEMBLY

SRM-266/S

ASSEMBLY

Plastic Shield Installation

(Nylon line operation)

Parts Required:

Plastic Debris Shield, Shield Plate,

 

three (3) 5 x 16 mm screws.

 

 

 

 

 

 

 

 

 

 

 

 

The plastic shield is for use with the Nylon Line Head only. Install Metal Shield when using plastic or metal blades, or serious injury may result.

1.Remove plastic threaded shaft sleeve and adapter plate (C) from PTO shaft (A).

2.Place the shield on the bottom of the bearing housing flange.

3.Place shield plate (B) on shield, align holes. Install three (3)

screws from bottom through plate and shield into gear case.

A

4. Assemble adapter plate (C) onto PTO shaft.

B

 

C

Nylon Line Head Installation

D

Parts Required: Nylon Line Head.

A

Wear Gloves or personal injury may result:

•

Cutoff knife is sharp.

C

•

Gearcase and surrounding area may be hot.

 

1.Be sure adapter plate (C) remains on PTO shaft (A).

2.Align locking hole in upper plate with notch in edge of gear housing and insert head locking tool (D).

3.Thread line head (E) onto shaft by turning it

counter-clockwise until head is tight against adapter plate

D

(C).

 

4. Remove locking tool (D).

E

Semi-automatic nylon line heads must be used only with plastic debris shield with cut-off knife. Using nylon line heads with metal debris shield can result in trimmer damage, caused by operation with excessive line length.

Note: Your nylon line head may appear different than nylon line head shown.

14

X7502026004

© 9/2014 ECHO Inc.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Burn HazardTable of Contents Introduction Servicing InformationManual Safety Symbols and Important Information SafetyAdditional or Replacement Manuals International Symbols On / OFFPersonal Condition and Safety Equipment Extended Operation / Extreme Conditions Do not Wear Open Toed Shoes Do not Operate Unit BarefootedClear the Work Area Repetitive Stress Injuries RSIRead the Manuals Keep a Firm GripEPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeEquipment Avoid Hot SurfacesEmission Control Exhaust & Evaporative Product Emission Durability Emission Compliance PeriodDescription Description Contents Nylon Line Head Installation AssemblyPlastic Shield Installation Remove Nylon Line Head Support Handle InstallationTo Advance Trimmer Line Operation Operation With BladesBlade Selection Handling Fuel FuelFuel Requirements Starting Cold Engine After useChoke Starting Warm Engine Stopping EngineSkill Levels MaintenanceMaintenance Intervals Air Filter Fuel FilterSpark Plug Cooling SystemExhaust System Spark Arrestor ScreenEngine Break-In Carburetor AdjustmentExhaust Port Cleaning High Altitude OperationDrive Shaft flex cable models Gear HousingLubrication Nylon Line Head Disassembly Instructions Nylon Line ReplacementSharpening Metal Blades Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Statements ExceptionsWarranty Statements Thank you for choosing Echo Power Equipment Product RegistrationSRM-266/S SRM-266/S SRM-266/S SRM-266/S ECHO, Incorporated

SRM-266/S specifications

The Echo SRM-266/S is a powerful and versatile string trimmer designed for both residential and professional use. Known for its robust performance and user-friendly design, this tool is ideal for tackling tough trimming jobs with ease.

One of the standout features of the Echo SRM-266/S is its efficient 25.4 cc two-stroke engine. This engine not only delivers high power output but also ensures smooth operation, making it capable of handling dense grass and thick weeds. The engine's design contributes to its lighter weight, resulting in easier handling and reduced fatigue during extended use. With a speed of up to 7,500 RPM, this trimmer excels in cutting performance and efficiency.

The SRM-266/S is equipped with a patented i-30 starting system that significantly reduces the effort needed to start the engine. This technology makes it easier for users to get the tool running with minimal hassle, especially during multiple starts throughout the day. Additionally, the professional-grade air filtration system enhances the engine’s longevity by reducing engine wear and ensuring cleaner air intake.

For versatility, the Echo SRM-266/S features a 17-inch cutting radius, making it suitable for maneuvering in tight spaces and covering larger areas efficiently. It also supports a variety of cutting attachments, including blades and different line sizes, allowing users to customize the trimmer for specific tasks. The tool’s heavy-duty bump head, which allows for easy line advancement, ensures uninterrupted work and increased productivity.

The design of the SRM-266/S focuses on user comfort and control. It comes with a vibrate-reducing handle system, which minimizes vibrations during operation, making it easier for users to maintain accuracy and reduce operator fatigue. The adjustable and ergonomic handle can accommodate various user heights and preferences, promoting a more comfortable grip.

Additionally, the Echo SRM-266/S adheres to strict emission regulations, ensuring environmentally friendly operation. It complies with EPA guidelines, which is increasingly important for professionals who prioritize sustainability in their landscaping practices.

In summary, the Echo SRM-266/S combines power, performance, and comfort, making it a top choice for both homeowners and professionals looking for a reliable string trimmer. Its advanced technologies and ergonomic design reflect Echo's commitment to quality and innovation in outdoor equipment. Whether you are maintaining your garden, trimming edges, or tackling larger landscaping projects, the SRM-266/S is designed to meet your trimming needs efficiently and effectively.
Top Page Image Contents