Marantz PMD351 manual CD Player Operation, Tape REWIND/FAST Forward, Tape Record, CD Playback

Page 13

TAPE REWIND/FAST FORWARD

Regardless of the direction that the tape transport is

currently in, pressing the (Fast Forward) control

button will place the tape transport in the high speed fast forward mode and the tape will advance quickly

from left to right. Pressing the (Rewind) control

button will place the tape transport in the high speed rewind mode and the tape will retract quickly from right to left. In either the fast forward or the rewind mode, the tape transport will continue to fast forward or rewind until the stop control button is pressed or the end of the tape is reached.

Note:

Automatic search operations cannot operate on the Tape and CD at the same time.

TAPE RECORD

1.Open the cassette holder by pressing the EJECT button. Load a recordable cassette tape into the cassette holder and close. The indicator on the

play control button will begin to flash. (If you wish to change the tape direction, press the play control button and then press the stop control button).

2.Set the DOLBY NR switch to the position that you want to record the tapes' noise reduction in (i.e. tapes to be recorded with Dolby B noise reduction need to have this switch in the Dolby B position, tapes to be recorded with Dolby C noise reduction need to have this switch in the Dolby C position, and tapes to be recorded without Dolby Noise Reduction need to have this control set to the Off position). When recording FM broadcast with Dolby Noise reduction on, set the MPX FILTER switch (on the back of the unit) to the On position.

3.Set the REVERSE MODE switch to the desired position.

4.Set the ALC control to the desired position, on or off.

5.Press the REC/PAUSE button. The REC indicator will begin to flash indicating the tape transport is in the record pause mode.

6.If the ALC control is in the Off position, use the MANUAL RECORD LEVEL control to adjust the input signal to the desired recording level.

7.Press the FORWARD PLAY button to begin recording in the forward direction. Press the

REVERSE PLAY button to begin recording in

the reverse direction. When the tape enters into the playback mode the REC indicator and the play control button indicator will change from the flashing mode to the constant on mode. This indicates the tape transport is in the record mode.

8.To pause the tape transport during recording, press the REC/PAUSE button. Press the play control button ( or )to resume recording.

9.Pressing the STOP button will stop the tape transport during recording. Pressing the rewind button in the play/record direction or

the fast forward button in the play/record direction will cause the unit to return to the position at which recording began.

CD PLAYER OPERATION

CD PLAYBACK

1.Open the compact disc tray by pressing the STOP/

EJECT button . Load a compact disc onto the compact disc tray and close the tray by gently pushing the front of the compact disc tray or by

pressing the STOP/EJECT button . The CD player display will show the general data of the current CD.

2.To begin playback of the compact disc, press the

PLAY/PAUSE button . The indicator in the PLAY/PAUSE button will illuminate. The display will show the data for the first track and the track will begin to play.

3.To pause the CD during playback, press the PLAY/ PAUSE button . The display will remain in the

current position and the indicator in the PLAY/ PAUSE button will begin to flash. Pressing the

PLAY/PAUSE button will resume normal playback from the point that the CD player was paused.

4.Upon completion of playback of the last track in the disc, the CD Player will return to the stop mode. You can also stop the CD playback by

pressing the STOP/EJECT button once.

Pressing the STOP/EJECT button again will cause the CD tray to open.

ENGLISH

- 13 -

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model PMD351 User Guide Laser Safety Read Before Operating Equipment Important Safety InstructionsEquipment mains working system CE marking only EU versionEquipment Control and Connection Diagrams Table of Contents Features Operating PrecautionsIntroduction Cassette Tape Holder Front Panel Controls DisplaysDisplay Tape Deck and CD Player ControlsHeadphones jack HP Select switchD e Reverse Play button Stop buttonReverse Mode switch CD Pitch Control buttons Dolby NR switchOne-way mode Two-way modeTotal indicator Track indicatorREM indicator DisplayCassette Deck Operation Power CordRear Panel Connections Tape PlaybackTape REWIND/FAST Forward CD Player OperationTape Record CD PlaybackSelecting the Track Precautions for unfinalized CD-R/CD-RW discsProgram Play Playing unfinalized CD-R/CD-RW discsMP3 File Playback Playing Albums in Sequence MP3 PlaybackSelecting and playing albums folders Manual Level Tape Dubbing CD to Tape DubbingExtended Cascade Operation Automatic Record Level Tape DubbingExtended Cascade Playback Extended Cascade RecordingAuto Tape Selector Erasure of TapeTo Protect Valuable Recordings RS-232C control Commands Requesting StatusREC Status changes automatically transmittedStatus data transmission Control commandsRC-5 Codes Cleaning Exterior Surfaces Care and MaintenanceCompact Discs Tape Deck TroubleshootingCD Player Common Parts SpecificationsPMD351 ConnectionsRC-5 AmplifierHow You Can Get Service Limited WarrantyMarantz is a registered trademark

PMD351 specifications

The Marantz PMD351 is a compact, high-performance portable audio recorder that has made a significant mark in the industry with its blend of advanced technology and user-friendly features. Designed predominantly for field recording, the PMD351 is an ideal choice for journalists, musicians, and sound engineers seeking a reliable solution for capturing high-quality audio on the go.

One of the standout features of the Marantz PMD351 is its dual-format recording capability. It supports both WAV and MP3 formats, allowing users to select the audio quality that best fits their needs and storage requirements. With the ability to record in WAV format at 24-bit/96 kHz, the PMD351 captures sound with remarkable clarity and detail, making it suitable for professional-grade applications.

The device is equipped with dual XLR/TRS inputs, which provide versatile connectivity options for various microphones and instruments. This flexibility allows users to capture sound from different sources with ease. Additionally, the PMD351 includes phantom power support, making it compatible with condenser microphones that require external power, further expanding its recording capabilities.

An easy-to-read color LCD screen is a key characteristic of the PMD351, offering clear visibility of recording status, levels, and file management. The intuitive user interface allows for quick navigation through menus and settings, which is particularly beneficial during live recording sessions where time is of the essence.

The PMD351 also boasts onboard features such as an integrated limiter and low-cut filter, which help to mitigate distortion and reduce unwanted low-frequency noise, respectively. This ensures that recordings maintain a professional quality even in challenging acoustic environments.

For added convenience, the Marantz PMD351 is powered by either AA batteries or an external power supply, giving users the flexibility to record for extended periods without interruption. The lightweight and portable design makes it easy to carry, enabling users to take it anywhere and capture high-quality audio whenever and wherever necessary.

In conclusion, the Marantz PMD351 is a feature-rich portable audio recorder that excels in both performance and usability. With its dual-format recording capabilities, versatile connectivity options, and innovative onboard features, it is an essential tool for anyone looking to achieve outstanding audio quality in a wide range of settings. Whether used in journalism, music production, or field research, the PMD351 stands out as a reliable and effective recording solution.
Top Page Image Contents