Echo 99944200490 manual Contents, Assembly Power head shaft/lower shaft assembly

8

Contents

The ECHO product you have purchased has been factory pre-assembled for your convenience.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

_____	1	- Power Blower Attachment
_____	1	- Operators Manual
_____	1	- Warranty Card
_____	1	- Storage Hook Assembly

Assembly

power head shaft/lower shaft assembly

Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling.

1.Set Power Head/Shaft Assembly on a level surface.

2.Pull locator pin (A) and rotate counter clockwise 1/4 turn to lock out position.

3.Remove vinyl cap from attachment drive shaft.

4.Remove cardboard spacer, if necessary.

5.Carefully fit attachment lower drive shaft assembly into coupler (B) to decal assembly line (C), making sure that the inner lower drive shaft engages into the upper drive shaft mount.

NOTE

Earlier model Power Heads may have shorter couplings. Short couplings fit flush to decal point (E). New couplings are 4-3/4 in. long, and fit flush to line (C).

B

D

A

D

C

A

6.Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft hole. Insure locator pin is fully engaged by gently twisting lower drive shaft. Locator pin (A) should snap flush in coupler.

Full engagement will prevent further shaft rotation.

7.Secure lower shaft assembly to coupler by tightening clamping knob (D).

E