Echo 99944200470 manual Specifications, Assembly Power Head SHAFT/LOWER Shaft Assembly, Model

	POWER EDGER ATTACHMENT	7
	OPERATOR'S MANUAL
SPECIFICATIONS
MODEL -----------------------------------------------------	POWEREDGERATTACHMENT
Shaft Length ------------------------------------------------	845mm(33.25in.)
Attachment Width -----------------------------------------	165.1mm(6.50in.)
Attachment Height ----------------------------------------	552.45mm(21.75in.)
Weight w/blade --------------------------------------------	2.3 kg (4.96 lb.)
Drive Shaft Type -------------------------------------------	6.35 mm (1/4 in.) Flex Shaft
Rotation Direction -----------------------------------------	Clockwise viewed from right side
Blade Length -----------------------------------------------	203mm(8in.)
Gear Case Ratio --------------------------------------------	1.6 : 1.0 Reduction

ASSEMBLY

POWER HEAD SHAFT/LOWER SHAFT ASSEMBLY

Tools Required: None

Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling.

1.Set Power Head/Shaft Assembly on a level surface.

2.Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock- out position.

3.Carefully fit attachment drive shaft assembly into coupler (B) to decal assembly line (C), making sure that the inner lower drive shaft engages into the square upper drive shaft socket.

NOTE

Earlier model Power Heads may have shorter couplings. Short couplings fit flush to decal point (E). New couplings are 4-3/4 in. long, and fit flush to line (C).

NOTE

Lower bearing housing and head assembly must be in line with the engine.

B

D

A

B

D

A