Echo PE-225 manual Starting cold engine, Purge Bulb

Page 13

Power Edger

13

Operator's Manual

 

 

 

starting cold engine

warning

The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown.

1.Stop Switch

Move stop switch (A) away from the STOP position.

2.Choke

Move choke (B) to “Cold Start” () Position.

3.Purge Bulb

Pump purge bulb (C) until fuel will be visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

4.Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grasp throttle handle with left hand and fully depress throttle trigger to wide open position. Rapidly pull recoil starter handle/rope (D) until engine fires (or maximum five

[5] pulls).

5.Choke

After engine fires or five (5) pulls, move choke lever back to “Run”

() position. Hold throttle trigger fully depressed and pull starter handle/rope until engine starts and runs. Release throttle trigger and allow unit to warm up at idle for several minutes.

NOTE

If engine does not start with choke in “Run” position after 5 pulls, repeat instructions 2 - 5.

6.After engine warm up, gradually depress throttle trigger to increase engine RPM to operating speed.

A

B

C

D

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Power Edger Table of Contents Safety manualIntroduction Operators manualInternational symbols Safety Manual Safety Symbols and Important InformationEye Protection Physical ConditionHand Protection Proper ClothingRead the Manuals Repetitive Stress InjuriesEquipment EPA 2010 and Later and/or C.A.R.B. TierEmission Control exhaust & evaporative Description Shaft DecalPage Assembly Drive shaft/power head ContentsThrottle linkage and ignition leads Operation Front handleFuel Handling Fuel Fuel RequirementsPurge Bulb Starting cold engineStopping engine Starting warm engineOperating techniques Maintenance intervals MaintenanceSkill level Fuel filter Air filterCooling system Spark plugExhaust system Spark Arrestor ScreenExhaust Port Cleaning Engine Break-In Carburetor adjustmentHigh Altitude Operation Drive Shaft Gear HousingLubrication Blade replacement Power MEdger 23 perator s anualInternal engine problem See your Echo dealer TroubleshootingStorage Long Term Storage over 30 daysModel PE-225 SpecificationsExceptions Warranty Statements99922201032 12/03/09 01/2010 Page Power MEdger 31 perator s anual Warranty registration Additional or replacement manuals ServiceServicing Information parts/serial number Echo consumer product support
Related manuals
Manual 36 pages 19.31 Kb

PE-225 specifications

The Echo PE-225 is a powerful and versatile gas-powered brush cutter designed for both residential and commercial landscaping tasks. Engineered for efficiency and ease of use, this tool combines advanced technology with reliable performance, making it ideal for tackling tough vegetation in yards and gardens.

One of the standout features of the Echo PE-225 is its robust 21.2cc two-stroke engine. This engine is designed to deliver impressive power while maintaining a lightweight design, allowing users to handle the tool with minimal fatigue. The engine employs a unique intercooler system that helps to maintain optimal temperature, ensuring consistent performance even during extended use.

The ergonomics of the Echo PE-225 are noteworthy, featuring a comfortable handle layout that reduces strain on the user's wrists and arms. The adjustable handlebar provides extra comfort by allowing users to customize their grip and hand positioning based on their personal preference. This design element enhances the overall user experience, especially during longer jobs that require a considerable amount of time on the tool.

This brush cutter utilizes a dual-line cutting system, which boasts a robust 0.095-inch line that cuts through thick grass and weeds effortlessly. The easy-to-load spool ensures that users can quickly replace the cutting line without wasting time or effort. Additionally, the PE-225 features a semi-automatic line feed system that advances the line as needed during operation, minimizing interruptions and maximizing efficiency.

For durability and longevity, the Echo PE-225 is constructed with high-quality materials, including a heavy-duty gear case that can withstand rigorous use and harsh conditions. The solid build reduces the likelihood of breakdowns and repairs, making it a cost-effective alternative for both homeowners and landscaping professionals.

The PE-225 also offers versatility, with interchangeable attachments that can turn the brush cutter into a multi-tasking landscaping tool. This adaptability makes it suitable for various tasks, including trimming, edging, and cutting thicker brush.

In summary, the Echo PE-225 is an excellent choice for anyone in need of a reliable and efficient brush cutting solution. Its powerful engine, ergonomic design, dual-line cutting system, and durable construction make it a standout option for tackling any landscaping challenge. With the Echo PE-225, users can achieve professional-level results with ease and comfort.
Top Page Image Contents