Echo CS-370 instruction manual Automatic Oiler, Oil Filter, Decrease Increase

Page 31

CS-370

MAINTENANCE

 

 

Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the United States to be equipped with a special low permeation fuel supply hose between the carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part.

Automatic Oiler

The discharge volume of the automatic oiler is adjusted to approximately 4 mL/min at 7000 r/min, prior to shipment from factory.

Always check oil discharge when in use.

Turn adjusting screw (A) counterclockwise to increase oil volume, clockwise to decrease oil volume.

Do not turn the adjusting screw beyond the maximum or minimum limit of volume adjustment.

A

Decrease Increase

Oil Filter

Check periodically.

Do not allow dust to enter into oil tank.

A clogged oil filter (B) will affect the normal lubricating system.

1.Using a wire bent into the shape of a hook, pull filter out through gas port, and inspect filter.

2.If the filter is dirty, wash it in gasoline or replace it.

3.When the inside of the tank gets dirty, rinse the tank out with gasoline to clean it.

Guide Bar

1.Clean before using.

2.Clean the groove (A) of the guide bar with a small screwdriver.

3.Clean oil holes (B) with a wire.

4.Invert guide bar periodically.

5.Clean the bar mount area before installing of the bar.

B

A

A

B

X7503251407

31

© 12/2013 ECHO Inc.

Image 31
Contents Burn Hazard Chain SAWTable of Contents CS-370 Packing ListRules For Safe Operation SafetyCorrect Use Of Chain Brake Testing The BrakeChain Brake Operation Automatic Chain Brake Other Safety PrecautionsCS-370 Personal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdSafety Hot Surface Symbols and SignsProduct Emission Durability Emission Compliance Period Manual Safety Symbols and Important InformationEmission Control Exhaust / Evaporative EPA 2010 and Later and/or C.A.R.B. TierDescription Description Preparation For Use Guide Bar and Saw Chain Installation/RemovalTip Guard to Bar Instructions Adjusting Chain Tension CS-370 Handling Fuel OperationFuel Fuel RequirementsMixing Instructions Chain LubricantStarting Cold Engine Winter OperationStarting Hard to Start Engine Starting Warm Engine Stopping RunningChecking Chain Tension Cutting Instructions Chain Lubrication TestGeneral Felling The Tree Bucking LimbingGuide Bar Chain And Guide Bar CombinationSaw Chain Maintenance Intervals MaintenanceSkill Levels Engine Break-In Carburetor AdjustmentFuel Filter Air FilterSpark Plug Check Fuel SystemOil Filter Automatic OilerDecrease Increase Sprocket Cooling System CleaningSpark Arrestor Muffler Spark Arrestor Screen Exhaust Port CleaningSetting Saw Chain Setting The Saw ChainMaintenance Engine Problem Troubleshooting Chart TroubleshootingStorage After Use StorageNGK BPM8Y Technical DataOWNER’S Responsibility Warranty StatementsWarranty Statements CS-370 CS-370 Parts/Serial Number ServiceWarranty Registration Additional or Replacement Manuals Servicing InformationECHO, Incorporated