Marantz SA8001 manual Quick Replay

PLAYING TRACKS IN A SPECIFIC SEQUENCE (PROGRAM PLAY)

You can arrange and play tracks in a specific sequence. Up to 30 tracks to be played can be programmed.

To Check the Programmed Tracks

Press the SCROLL/RECALL button on the remote control during the program or when the program is stopped (“PROG” lights up).

Every time press SCROLL/RECALL button, the programmed tracks will be displayed one after the other in order.

Q&A

•How many tracks can be programmed?

Up to 30 tracks can be programmed for program play.

QUICK REPLAY		ENGLISH
When Q.REPLAY	button is pressed during

playback, the unit goes back to the amount of time set by the MENU and starts playback from there.

* Playback that goes beyond the track is not allowed.

Also, when the total time of the track being played

(Example: To program the 7th track after 15th track in a disc with 25 tracks)

			RNDM TRK				A – B						AMS
			PROG				ALL		1			TOTAL	SING REMAIN		SACD
TEXT	1	2	3	4	5	6	7	8	9 10	11 12	13 14	15 16	17 18	19 20	STEREO

qPress PROGRAM button on the remote in stop mode. “PROG” indicator will light up and it goes to program mode.

Lights up

To Delete a Programmed Track

q Press CANCEL	button in stop mode when program
has been made (When “PROG” indicator is
lighting up).
w Every time press	CANCEL button, the programmed

tracks are deleted in order from the last track programmed.

Also, the deleted track’s track number indicator will disappear.

•Can I listen to program play repeatedly?

Press REPEAT button once. “” “ALL” indicator will light and program play will be repeated.

•Can I shuffle the programmed track order?

Press RANDOM button in stop mode.

is shorter than the time set for quick replay, or when

the playback time is shorter than the time set for

quick replay, if Q.REPLAY button is pressed, the

track will be goes back to the start of that track and

playback is started from there.

To Set Quick Replay Time

qIf a disc is loaded in the disc tray, eject the disc and close the tray.

wPress the MENU button on the remote control.

			RNDM TRK				A – B						AMS
			PROG				ALL		1			TOTAL	SING REMAIN		SACD
TEXT	1	2	3	4	5	6	7	8	9 10	11 12	13 14	15 16	17 18	19 20	STEREO

wChoose a track to be programmed with numeric buttons on the remote.

(Example: The 15th track is chosen and it’s length is 4min30sec)

Lights up

			RNDM TRK				A – B						AMS
			PROG				ALL		1			TOTAL	SING REMAIN		SACD
TEXT	1	2	3	4	5	6	7	8	9 10	11 12	13 14	15 16	17 18	19 20	STEREO

1st track programmed	Only the numbers of
	programmed tracks light up

eWith the sequence described in step w above, program another track. Repeat that sequence to program all the tracks you want. You can program up to 30 tracks.

(Example: The 7th track is chosen and total length of 7th and 15th is 7min50sec)

Lights up

			RNDM TRK				A – B						AMS
			PROG				ALL		1			TOTAL	SING REMAIN		SACD
TEXT	1	2	3	4	5	6	7	8	9 10	11 12	13 14	15 16	17 18	19 20	STEREO

Total programmed number Total playing time of programmed tracks

rPress PLAY button to starts playback in programmed order.

*When 21 or more tracks are programmed, will light up instead of the track number indicator.

To Clear Whole Program

Press STOP button two times while in program

play. In the stop mode, press STOP button once. Program can also be cleared by pressing OPEN/CLOSE key to open the disc tray.

To Add Tracks to Program

Tracks can be added to the end of program when program is remaining (“PROG” indicator is lighting up) and in stop mode.

However tracks cannot be added to the program when the RNDM (random) indicator is lighting up.

* Please be careful about the following matters.

•When programming 1st through 9th tracks in a disc that has over 10 tracks by using numeric buttons. For instance, programming the 3rd track after programming the 1st track, press 3 button more than approximately 1.5 seconds after 1 button is pressed. When a program is finalized, the time is updated.

•Likewise, when programming a track at 10th or after. For example, to program 13th track, press

3button within approximately 1.5 seconds after

1button is pressed.

•When programming a track in a disc that has less than 9 tracks. For instance, to program the 5th track after 4th track has been programmed, press

5button more than approximately 0.5 second after

4button is pressed.

SEARCHING YOUR FAVORITE TRACKS (AMS (AUTOMATIC MUSIC SCAN) PLAY)

This feature is convenient to search where your favorite track is.

If AMS button on the remote is pressed in stop mode, the PLAY “3” indicator will blink and the beginnings of all the tracks will be played for 10 seconds each starting from the first track.

Also, if the AMS button is pressed during playback, the PLAY indicator “3” will blink, and the program will jump to the next track after a display time of approximately 10 seconds.

Light up

			RNDM TRK				A – B						AMS
			PROG				ALL		1			TOTAL	SING REMAIN		SACD
TEXT	1	2	3	4	5	6	7	8	9 10	11 12	13 14	15 16	17 18	19 20	STEREO

When you find a song that you want to listen to, press the AMS button again or press the PLAY button. PLAY indicator will light up constantly and normal playback will begin from the current track.

*If the AMS button is pressed after the tracks are programmed, only the programmed tracks are played by AMS.

e Press the ENTER button on the remote control while Quick Replay is displayed (approx. 3 seconds). The current time setting appears on the display. (The default setting is 10 seconds.)

rUse the or button to set the time. (10 seconds/20 seconds/30 seconds)

tAfter making the setting, press the MENU button twice. The display returns to the normal display.

yThe time setting is retained even when the power is turned off.

Caution:

*When there is no key input for about 4 seconds during this series of operations, the setting will be configured to the conditions at that time and the display will return the time display.

11