Dixon 966412801, 115 239947 manual Safety Rules, General Operation, Slope Operation

Page 4

SAFETY RULES

SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS

DANGER !

THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

GENERAL OPERATION

Read, understand and follow all instructions in the manual and on the machine before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, stones, toys, wire etc., which could be picked up and thrown by the blades.

Be sure the area is clear of all people and pets before mowing. Stop the machine if anyone enters the area.

Never carry passengers or children even with blades off.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Be aware of the mower discharge direction and do not direct it towards anyone. Do not operate the mower without either the entire grass catcher or the guard in place.

Slow down before turning.

Never leave the machine unattended when the engine is running. Always turn off the blades, set the parking brake, stop the engine and remove the key before leaving the machine.

Turn off blades when not mowing.

Stop engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch out for traffic when operating near or crossing roadways.

Use extra care when loading and unloading the machine onto a trailer or truck.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

DO NOT operate mower with grass catcher, unless the front weights are installed.

Keep machine free of grass, leaves or other debris buildup which can touch hot exhaust/engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause buildup to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

DO

Mow up and down slopes (10° Max.), not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low speed so that you will not have to stop while on the slope.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.

DO NOT

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-off, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

4

Image 4
Contents Operator and Parts Manual Know Your Blower System Contents General Operation Safety RulesSlope Operation Children Never allow children to operate the machine1INSTALLING Drive Pulley Assembly2MOUNTING Blower Assembly 3INSTALLING Drive Belt 4INSTALLING Belt Covers6INSTALLING Middle Chute 5TRIMMING Middle Chute8MOUNTING Cover Assembly 7INSTALLING Bagger Mount9INSTALLING Spacer Plugs 10CONTAINER Installation 11CHUTE/HOOD InstallationOperation Tips for Improved BaggingStorage Repair Parts QTY Description Item Part no 11 8 7 LATCH, Hood 13 10 20 2726 Cover ASSY, Complete 115 239947 IR 05/15/09

115 239947, 966412801 specifications

Dixon 966412801,115 239947 is a high-performing product known for its reliability and versatility across various applications. This innovative solution has garnered attention for its impressive features and advanced technology, making it a favorite among professionals in multiple industries.

One of the primary characteristics of the Dixon 966412801 is its robust construction. Crafted with high-quality materials, it ensures durability and long-lasting performance even in demanding environments. This resilience is further enhanced by its corrosion-resistant properties, making it ideal for use in outdoor and industrial settings where exposure to harsh elements is a concern.

The product features an ergonomic design, which enhances user comfort and functionality. This design approach minimizes fatigue during prolonged use, making it an excellent choice for workers who rely on tools for extended periods. Additionally, the Dixon 966412801 boasts a lightweight profile, allowing for easy handling and transportation without compromising on strength.

In terms of technology, the Dixon 966412801 is equipped with cutting-edge innovation that streamlines operations. Its efficient performance is attributed to advanced engineering techniques that optimize energy consumption and reduce waste. This energy-efficient performance not only lowers operational costs but also supports environmentally friendly practices.

Furthermore, the Dixon 966412801 is designed with user safety as a top priority. It incorporates features such as secure locking mechanisms and protective housing, ensuring that users are safeguarded during operation. These safety elements reassure users in high-pressure environments, enhancing overall productivity and confidence in the product.

Versatility is another hallmark of the Dixon 966412801. It can be seamlessly integrated into various applications, including construction, manufacturing, and automotive sectors. The adaptability of this product allows it to meet diverse operational requirements while maintaining high performance standards.

In summary, Dixon 966412801,115 239947 stands out as a formidable choice for those in need of a dependable, high-performance tool. Its combination of durability, ergonomic design, innovative technology, safety features, and versatility makes it a valuable asset in any professional toolkit. Whether in industrial environments or more casual applications, this product proves itself as a leader in its category.