Dixon DCG 114883, DFS 114883 Hopper Door Adjustment, Blower Kit, Operating the Collection System

Page 9

ASSEMBLY

Hopper Door Adjustment

Adjust door rods on both sides with adjusting nut so door closes evenly. See illustration.

HOPPERDOOR

HOPPER

 

 

DOOR

 

RODS

 

ADJUSTMENT NUTS

 

8059-013

Blower Kit

Install Blower Kit per the instructions shipped with the blower unit. (114992 for the 52" or 130195 for the 60".)

Operating the Collection System

1.NEVER USE THE COLLECTION SYSTEM WITHOUT THE BLOWER ASSEMBLY AND HOSES SECURELY ATTACHED.

2.Make sure hoses are connected at both ends. Inspect hoses prior to each use.

3.Do not use the unit on slopes greater than 10 degrees.

4.The mower must be running in order to vacuum debris through the mower deck.

5.In heavy grass it may be necessary to mow and collect at a slower ground speed.

6.Never attempt to unclog the collection system until the mower’s engine has been shut off and all moving parts have come to a complete stop.

7.Do not stand behind the vent at the rear of the collection system due to the potential for small pieces of blowing debris to escape through the vent.

8.Wear eye and ear protection.

9

Image 9
Contents Operator’s Manual Parts List Dixon. All Rights Reserved Index Features Safety Procedures General InformationGeneral Information Assembly Instructions Safety InformationCollection System AssemblyHandle Assembly Hopper Door Adjustment Blower KitOperating the Collection System Cleaning and Washing Service and MaintenancePreventative Maintenance Schedule TransportCleaning Poly Mesh Troubleshooting GuideCaring For Hoses Item QTY Description Hopper AssemblyDrive KIT Assembly Item P/N QTY Description Hood AssemblyPage Part No 130680R1 01/07