Dixon ZTRCLASSIC manual Rear Chain Adjustment

Page 36

CARE AND MAINTENANCE

REAR CHAIN ADJUSTMENT:

To adjust the rear drive chains on the ZTR Classic, tighten the nut on top of the spring on each side of the mower chassis. Tighten until the chains have approximately 1/4” movement up and down when measured at a mid point. Refer to illustration.

NOTE: Adjust rear drive chains after first 10 hours of operation and every 40 hours thereafter.

Image 36

Contents ZTR Classic Important Read Carefully Index Safety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation Never carry passengersGeneral Operation Slope Operation Do notChildren Service Service CUT-MORE Specifications BodySeat Adjustment Instructions Model ZTR ClassicControls Parking BrakeTo SET Parking Brake Transmission Drive SystemControl Levers To GO ForwardTo GO Backward TurningBlade Drive Circuit BreakerThrottle Control Lever Mower Deck Lift LeverOperation Instructions TowingBefore Operating Mower Testing of Safety Interlock Systems Blade Drive Switch TestEngine should Stop Starting Instructions Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment Mowing with a Mulching Attachment CUT High MOW OftenMowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Care and Maintenance Maintenance ScheduleBattery OFF Season Battery StorageEngine TiresCutter Blade Maintenance Belts Belt TensionMower Deck Leveling Prcedure Deck Removal Changing the Engine OIL OIL FillDrive System Adjustments Rear Chain Adjustment Lubrication ChassisLocations Cleaning the Mower WarrantyPARTS/SERVICE Electrical SystemsStandard Service Parts List Briggs & Stratton AIR and OIL Filter Part NumbersTroubleshooting Engine WON’T Turn OverEngine Runs but Mower WON’T Move Forward Page Owner Information ZTRMowers