Dixon ZTR 4518, ZTR 4516, ZTR 4515, 13782-0503 manual Specifications, Model ZTR

	SPECIFICATIONS
	Model ZTR 4515, 4516 & 4518
Chassis:	Twin 12 gauge side frames and 7 gauge transmission and engine
	base plate.
Body:	All body parts made of high density polyethylene. Dent and
	corrosion resistant.
Mower Deck:	42” Deck: 13 GA stamped steel construction-42” cut width
	50” Deck: 11 GA fabricated construction/reinforcement ribs-
	50” cut width
Blade Drive:	Electric clutch.
Transmission:	Each rear wheel is independently driven by a Hydro Gear IZT
	hydrostatic	drive.
Engine:
Model 4515:	15.5 HP Briggs & Stratton Vanguard, 4 cycle, single cylinder,
	overhead valve, air cooled, gasoline, vertical cast iron cylinder,
	pressure lube w/spin-on filter.
Model 4516:	16 HP Kohler Command 460 cc, single cylinder, overhead valve,
	air cooled, gasoline, full pressure lube with oil filter, vertical
	shaft, aluminum head & block with cast iron cylinder liner.
Model 4518:	18 HP Kohler Command, twin cylinder, overhead valve, air cooled,
	gasoline, full pressure lube with oil filter, vertical shaft, aluminum
	head & block with cast-iron cylinder liners.
Starting System: Electric-key switch operation w/safety interlock blade drive.
Tires:	Front 11 x 4.00-5 ribbed tread (16-21 PSI)
	Rear 18 x 8.50 x 8 4 ply turf tread (8-14 PSI)
Capacities:	Fuel	2.7 gallons
	Engine Oil	B&S 1.5 quarts
		Kohler 2 quarts
Dimensions:	Width	44” maximum track width
	Height	42” to top edge of seat
	Length	72” hitch tab to front bumper
	Weight	power unit: 463 lbs
		with 42” deck 547 lbs
		with 50” deck-603 lbs

Note: Additional information provided in service instructions under the

individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

14