CARE AND MAINTENANCE - 4000 SERIES MODELS
FUEL SHUT OFF VALVE: | Model ZTR 4421 (only) |
(The fuel shut off valve is not required on Models ZTR 4423 and ZTR 4424.)
The fuel shut off valve is located at the bottom rear of the fuel tank.
Always turn the valve to the "OFF" position when the mower is stored or not in use.
LUBRICATION:
CHASSIS: LOCATIONS: | Number of grease zerks used: (4) |
SERVICE INTERVALS: | (1) each front wheel caster and each front wheel hub. |
RECOMMENDED GREASE: | Every 50 hours of operation |
| Name brand wheel bearing or multi |
| Lubri cate each front wheel to allow even distribution of grease |
| within the wheel, rotate or spin each front wheel after (3) pumps of |
| the grease gun. Repeat process until the appearance of grease is |
| noted completely around each caster axle. |
Page 26