CONTROLS
PARKING BRAKE:
The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion.
CAUTION Engage parking brake before starting engine.
TO SET PARKING BRAKE:
The hand operated brake is located at the left hand side of the mower.
To engage brake, pull lever up (to the rear).
To release brake, move lever forward (down).
Note: | Always set parking brake before dismounting. |
| Release parking brake before moving mower. |
HYDRO GEAR SYSTEM:
Allows the mower to turn on its own axis (zero turning radius).
Each lever controls one side of the mower.
Note: | The pressure required to operate the mower is |
| very light. |
18