Dixon 18134-1004 manual Starting Instructions

Page 23

OPERATION INSTRUCTIONS

CAUTION Failure to follow these instructions may

result in personal injury.

STARTING INSTRUCTIONS:

1.Parking brake must be on, control levers in outward position and blade drive disengaged.

2.Position throttle to 1/2 speed setting. If engine is cold, position choke lever to the “on” position.

NOTE:

Engine may require partial choke setting to start even

 

if the engine has been operated for a period of time.

3.Insert ignition key and turn to “start” position. When engine starts, release ignition key. Key will return to “run” position.

4.Return choke to “off” position, if applicable.

5.Move “throttle” to maximum speed position.

6.Release parking brake.

7.Swing levers inward.

8.Operate mower per “CONTROL” instructions on Page 19.

CAUTION Do not operate the engine in an enclosed

 

area due to the harmful exhaust gas produced.

Note:

When mowing with blades engaged, set throttle

 

control to the MAXIMUM or wide open setting to

 

insure adequate cooling of the engine and to maintain

 

mower deck blade speed.

23

Image 23
Contents Grizzly ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Kodiak, Grizzly & SilverTip Mowers Grizzly SpecificationsSeat Adjustment Instructions Control Levers ControlsMower Deck CUT Height Lift Lever Parking BrakeTo SET Parking Brake Choke and Throttle Control Levers Blade DriveCircuit Breaker Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat Fluid Maintenance Procedure Neutral Adjustment Neutral Spring Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Mower Deck Removal Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEEngine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Grizzly Standard Service Parts ListDate OIL Changed Date Engine Tuned OWNER’S InformationDixon INDUSTRIES, INC