Dixon ZTR 6025 manual Steering Control Adjustments

Page 28

CARE AND MAINTENANCE

STEERING CONTROL ADJUSTMENTS

A.To Adjust Neutral:

1.Remove the fender skirts from each side of the machine.

2.Block up the unit so that the Drive Wheels are off the ground.

3.Start the engine and run at a fast idle with the Steering control levers in the "out" position.

4.Loosen the locknuts tightened against the rod end ball joints in the Upper Linkage Assembly. NOTE: One of these is a left hand nut and will have to be turned backwards.

5.Adjust the Neutral Position by turning the rod in the upper linkage until the wheel stops turning.

6.Retighten the nuts on the Upper Linkage Assembly and check to see that the drive wheel is still not turning.

7.Repeat steps 1-6 for the other side.

8.Shut off engine before removing the blocks.

B.To Adjust "IN" Position of the Steering Controls:

1.Remove the two front bolts, lockwashers, and washers which hold the fender cap.

2.Pull the boot from the hole in the fender cap, exposing the cast iron lever.

3.Using a 5/32" Allen wrench, turn the setscrew to adjust the stop.

4.Replace the boot into the hole in the fender cap.

5.Replace the two front bolts, lockwashers and washers.

C.To Align Handles:

Sit on the seat and push the control levers full forward and full backward. If the ends do not match the handles may be adjusted as follows:

1.Locate setscrew stops in the steering control lever base which stop the lever in each direction. NOTE: The one at the rear is the stop for FWD and the one in the front is the stop for REV.

2.Adjust setscrew stops so that handles line up together when shifted full forward and full reverse.

Page 28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 6000 Important Read Carefully Index Safety Safety Alert Symbol General Operation Slope Operation Do notSafety Service Dixon Limited WARRANTYPOLICY- Commercialmodels Models6000&7000Specifications Series Forward MountSeat Adjustment Instructions Controls Control LocationsParking Brake To GO Backward Circuit Breaker Blade DriveMower Deck CUT Height Lift Lever Operation Instructions TowingTesting of Safety Interlock Systems Starting Instructions Cold Engine Unlock TransmissionStarting Instructions Discharge chute Grass Height SuggestionsCare and Maintenance Maintenance ScheduleEngine Mower Blades BeltsLubrication Checking & Replenishing OIL in Hydrostatic TransmissionHydrostatic Transmission Parking Brake AdjustmentScalper Roller Bolts Hydrostat Drive Belt Tension Adjustment Steering Control Adjustments Steering Control Adjustments Lower and Reattach the Deck see diagram-page Down Hanger Engagedposition Checking Deck Drive Gearbox Fluid Level Changing the Fluid in Deck Drive GearboxLeveling the Deck Deck Spindle Belt Diagram Model ZTR Standard Service Parts ListKohler AIR and OIL Filter Part Numbers Troubleshooting Engine Wont Turn OverEngine Sometimes Skips AT Higher Speed Page Owner Information Date OIL Changed Date Engine TunedSeries 6025

ZTR 6025 specifications

The Dixon ZTR 6025 is a robust zero-turn riding mower designed for both residential and commercial use. Known for its innovative features and cutting-edge technology, it offers an efficient and comfortable mowing experience. This mower stands out in the market due to its reliable performance, user-friendly design, and exceptional durability.

The heart of the Dixon ZTR 6025 is its powerful engine, typically equipped with a commercial-grade Kohler or Kawasaki powerplant. This engine delivers impressive horsepower, ensuring the mower can tackle even the toughest mowing tasks with ease. The additional torque produced by the engine allows it to handle thick grass and uneven terrain without compromising performance.

One of the most notable features of the ZTR 6025 is its zero-turn radius capability, which enables the mower to maneuver around obstacles with extreme precision. This feature is particularly beneficial for trimming around trees, flower beds, and fences, reducing the need for additional trimming tasks. The dual hydrostatic transmission ensures smooth and responsive control, providing operators with excellent handling at various speeds.

The cutting deck of the Dixon ZTR 6025 is another highlight. Typically available in 48 to 60-inch widths, it is engineered for efficiency and uniform cutting performance. The robust design allows for multiple height adjustments, enabling users to achieve the desired lawn height regardless of the season. The mower’s high-quality cutting blades ensure a clean and precise cut, promoting healthier grass growth.

Comfort and user experience are also paramount in the design of the ZTR 6025. The mower boasts a well-padded seat with ergonomic support, allowing operators to mow for extended periods without discomfort. Integrated armrests add to the overall comfort, while large, easy-to-use controls make operation intuitive for users of all skill levels.

The Dixon ZTR 6025 also incorporates advanced technology, with some models featuring digital displays that provide real-time information about speed, fuel levels, and maintenance reminders. This focus on technology enhances user experience and helps maintain the mower's performance over time.

In summary, the Dixon ZTR 6025 combines power, precision, and comfort in a compact design, making it an ideal choice for anyone seeking a high-quality zero-turn mower. Its impressive features, including a powerful engine, dual hydrostatic transmission, durable cutting deck, and user-friendly design, ensure that it delivers exceptional performance for both homeowners and professionals alike.
Top Page Image Contents