Marantz SA7001 manual Operation, Connecting the Power Supply, Normal Playback

Page 13

OPERATION

*In this instruction manual, some operations can only be performed with the remote control. For operations that can be performed with buttons both on the main unit and on the remote control, the

button names are shown in the mark. And for operations that can only be performed with

buttons on the remote control, the button names are shown in the mark.

To start playback form the first track

Press

PLAY button.

To stop playback

Press STOP button.

To eject disc

Press OPEN/CLOSE button to open the disc tray and take the disc off. Press the button again to close the tray.

7 Switching Sound Mode

ENGLISH

(Super Audio CD)

 

SOUND MODE Button

CONNECTING THE POWER SUPPLY

qPress POWER switch to turn on.

Disc tray must be closed when the unit is not be used.

1Plug the power cable into AC IN jack on the back panel.

2Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector on the connected unit to this unit.

3Plug the power cable into an AC outlet.

NORMAL PLAYBACK

7Super Audio CD player playback

q

w, e r

Display

The display cycles from TOC Reading No Disc (when no disc is loaded) Super Audio CD (when the start sound mode setting is Super Audio CD).

wPress the OPEN/CLOSE button

The disc tray comes out. Place the disc with label side up on the tray.

To play a single (8cm) CD, place the disc with the indentation at the center of the tray.

ePress OPEN/CLOSE button.

rPress PLAY button.

Disc type is automatically detected and playback is started. Track number and track elapsed time(minute, second) appear on the display.

*For Super Audio CD/CD hybrid-layer discs (See page 2), the layer that is set in the start sound mode (See page 10) is played. To change the layer, use the SOUND MODE button. (See page 9)

(Exp.:Track 6, Elapsed time 2 min 8 sec)

Number of current track

Minutes

Seconds

 

 

 

RNDM TRK

A – B

 

 

 

 

AMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG

 

 

ALL

1

 

 

TOTAL SING REMAIN

SACD

TEXT

1

2

3

4

5

6

7

8

9 10

11 12

13 14

15 16

17 18

19 20

 

STEREO

Remaining track numbers

Playback automatically stops at the end of the final track.

To pause playback

Press PAUSE button.

PAUSE indicator will light and playback is paused at the point that the button is pressed. To restart

playback, press PAUSE button again or press PLAY button.

To change time display

Press the TIME button on the remote control. Each time TIME button is pressed, display will change in the following order. “Track elapsed time”

“Track remaining time” “Total remaining time”

“Track elapsed time”.

Track remaining time

(The remaining playing time from the playing point to the end of the current track)

“SING REMAIN” is displayed “–” is displayed

 

 

 

RNDM TRK

A – B

 

 

 

 

AMS

 

 

 

 

 

PROG

 

 

ALL

1

 

 

TOTAL

SING REMAIN

SACD

TEXT

1

2

3

4

5

6

7

8

9 10

11 12

13 14

15 16

17 18

19 20

STEREO

Total remaining time

(The remaining playing time from the playing point to the end of the last track)

“–” is displayed

“TOTAL REMAIN”

is displayed

 

 

 

RNDM TRK

A – B

 

 

 

 

 

AMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG

 

 

ALL

1

 

 

 

TOTAL SING REMAIN

SACD

TEXT

1

2

3

4

5

6

7

8

9 10

11 12

13 14

15 16

17 18

19 20

STEREO

* If TIME button is pressed when Super Audio CD disc that supports text is in use, time display is given priority and the text information will not be displayed afterward.To see the text information, press TEXT button.

qPress SOUND MODE button in stop

mode (not playing).

The currently selected layer or area is shown on the display. (CD or Super Audio CD)

If SOUND MODE button is pressed again, a playable layer or area will be shown, and the layer or area will be switched to new one.

*When layer or area is switched, TOC will be read again.

*The sound mode cannot be changed for Audio CDs and discs with only a Super Audio CD area.

*The sound mode on hybrid layer discs will be

changed in the following order.

Super Audio CD stereo area CD layer Super Audio CD stereo area

*Sound mode can be selected while the tray is open. Select a desired layer or area and press

PLAY button then the tray will close and playback will be started.

wPress the SOUND MODE button

during playback.

The currently selected layer or area is shown on the display. (CD or Super Audio CD)

If SOUND MODE button is pressed again, the playback is stopped, and the layer or area will be switched to new one.

When you want to listen at that area, press

PLAY button again. The playback will be started.

9

Image 13
Contents Model SA7001 / SA7001 KI User Guide English Français EnglishDeutsch NederlandsAdvertencias Foreword ContentsIntroduction Before UsingPrecautions InstallationUsing Remote Control Unit Inappropriate Places forFront Panel Names and FunctionsRemote Controller Remote Control IN, OUT input and output connectors Analog Output connectorsEXT./INT. Ext./Internal switch Rear PanelDisplay Connections Operation Connecting the Power SupplyNormal Playback Playing Your Favorite Tracks of a Disc Start Sound ModePlaying Your Favorite Parts of a Disc Search Repeated Disc Play Repeat PlayQuick Replay Timer Play Trouble ShootingSetting method of Timer Play About the Text Information DisplaySpecifications Is a registered trademark

SA7001 specifications

The Marantz SA7001 is a high-end SACD (Super Audio CD) player that embodies the philosophy of premium audio quality that Marantz has been renowned for. Launched as part of their celebrated SA series, the SA7001 is designed for audiophiles who appreciate the nuances of sound reproduction.

One of the standout features of the Marantz SA7001 is its high-performance DAC (Digital-to-Analog Converter). The player employs a high-quality AK4396 DAC, which supports a wide range of formats including SACD, CD, and various other digital audio formats. This ensures that whether you're listening to a classic CD or the latest SACD, you will benefit from exceptional sound clarity and detail. The player also supports 192 kHz/24-bit PCM signals, making it versatile for high-resolution audio files.

The engineering behind the SA7001 is impressive, with a focus on solid build quality and vibration reduction. The player features a robust chassis that is designed to minimize interference from external sources. Additionally, the disc mechanism is isolated to prevent unwanted vibrations, which can negatively affect sound quality. This attention to mechanical detail means that you can expect accurate playback without interference or distortion.

The Marantz SA7001 is equipped with a dual-layer disc mechanism that allows for seamless playback of both SACDs and standard CDs. One of the significant technologies included in the SA7001 is the Marantz proprietary HDAM (High Definition Amplifier Module), which assures optimum signal integrity. This technology ensures that audio signals remain clean and free from noise, leading to a richer listening experience.

In terms of connectivity, the SA7001 offers balanced XLR outputs, ensuring a professional-level connection for high-end audio systems. Additionally, there are standard RCA outputs for more conventional setups. The player also includes a digital output, which can be utilized to connect to external DACs or home theater systems, allowing for further versatility.

User-friendly features are also part of the Marantz SA7001, with an intuitive interface and remote control that enhance the overall experience. The player is compatible with a range of digital media interfaces, making it adaptable to modern audio setups.

In summary, the Marantz SA7001 SACD player is a testament to audio excellence, offering sophisticated design, advanced technologies, and an array of features aimed at delivering exceptional sound quality. Whether you are a casual listener or a serious audiophile, the SA7001 promises to elevate your audio experience to new heights.