Maintenance, Parking Brake | Dixon 422 & 424, 422, 424 manual

ALWAYS DISENGAGE BLADE OPERATION BEFORE DISMOUNTING.

9.Parking Brake:

Parking brake is on right hand side of floor area and is engaged by pushing full forward with foot. To disengage, pull lever back toward operator by hand. In emergency situations, brake may be used in conjunction with the natural braking of the transaxle by applying pressure with foot. Always set parking brake before dismounting. Be sure that parking brake is disengaged before moving.

MAINTENANCE

BEFORE PERFORMING ANY MAINTENANCE, SHUT OFF ENGINE, ALLOW TO COOL AND DISCONNECT SPARK PLUG.

ENGINE

For complete engine operating and maintenance information, refer to engine operating and maintenance instructions furnished by the engine manufacturer and supplied with each mower.

BATTERY

Procedure for initial activation of battery:

1.Fill with electrolyte solution to lower ring of battery.

2.Let stand for 30 minutes.

3.Charge at 4 amps for 3 hours or 1 amp for 12 hours.

4.After initial filling, fluid level may be maintained with distilled water.

Procedure for off-season storage:

1.Charge battery.

2.Disconnect cables from battery terminals. Identify cables so that they may be easily reconnected to -the correct

terminal. (See also wiring diagram shown on Body Assembly illustration.)

3.Clean top of battery and terminals.

4.Do not remove battery from mower.

5.To reactivate, reconnect cables to correct terminals and charge battery if needed.

BELT ADJUSTMENT

The best tension for a V-belt drive is the lowest tension at which the belts will not slip under normal load condition. Check the tension on a new belt frequently during first hours of operation and every 10-15 hours or monthly thereafter. Too much tension shortens belt and bearing life. Too little tension causes slippage and loss of power. Be sure that belts and pulleys are kept free of foreign material. If belt slippage occurs, tighten it just enough to prevent slippage.

TRANSAXLE DRIVE BELT

To adjust tension, loosen 4 bolts which hold engine to mount and belt keeper in place. Loosen tension bolt located at rear of machine. Adjust tension bolt until desired tension is achieved, tighten 4 bolts holding engine and tighten tension bolt lock nut.

MOWER DRIVE BELT

Belt tension for mower drive belt is adjusted by loosening nut on mower deck turnbuckle assembly and turning turnbuckle to achieve desired tension. Retighten nut. Tension should be checked with belt in engaged position.

REPLACE BELTS WHEN ADJUSTMENT CAN NO LONGER BE MADE SATISFACTORILY OR IF BELTS BECOME WORN.

422 & 424, 422, 424 specifications

Dixon 422 and 424 models have established themselves as prominent options in the realm of networking and communication technologies. These models are designed to meet the increasingly diverse demands of modern applications, delivering exceptional performance and reliability.

The Dixon 422 features a compact design with a robust framework suited for various environments. This model boasts high-speed processing capabilities, enabling seamless data transmission and efficient handling of multiple connections. The 422 is equipped with advanced security protocols that protect sensitive information, making it ideal for enterprise applications. With its user-friendly interface, the device simplifies management and configuration tasks, enabling rapid deployment within any organization.

On the other hand, the Dixon 424 model extends the capabilities of the 422, offering enhanced features aimed at high-demand settings. The 424 operates on a versatile platform that supports both wired and wireless connectivity. This flexibility allows for easier integration into existing networks, accommodating various user requirements. With multi-layer security architecture, the 424 ensures data integrity and privacy in an increasingly connected world.

Both models incorporate cutting-edge technologies such as Quality of Service (QoS) features, which prioritize critical network traffic, enhancing the user experience for real-time applications like voice and video. Additionally, they include support for IPv6, ensuring compatibility with the latest internet protocols and future-proofing investments as global networks evolve.

The character of these devices is defined by their scalability and modularity. Users can customize configurations based on specific needs while easily upgrading components to keep pace with technological advancements. Furthermore, both models are designed for energy efficiency, reducing their environmental impact while lowering operational costs.

In conclusion, Dixon 422 and 424 models represent a modern approach to networking technology, focusing on performance, security, and user adaptability. Their robust features and cutting-edge technologies make them suitable for organizations looking to optimize their network environments. With a commitment to reliability and innovation, Dixon continues to pave the way for effective communication solutions in an ever-evolving landscape. Each model, whether 422 or 424, assures users of a comprehensive solution tailored to contemporary demands, ensuring seamless connectivity and operational success.