Removing the Body, Removing the Mower Blade

REMOVING THE BODY

1.The 312 has a two-piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove the upper body to service the transaxle.

2.To remove upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283. Disconnect seat switch P/N 4761 at plug-In.

3.Reverse above procedure to reinstall.

ADJUSTMENT OF MOWER DECK DRIVE BELT

1.This mower deck drive belt is tensioned by a spring loaded engagement Idler quadrant.

2.This system Is designed to maintain the proper belt tension at all times.

3.Belt tension can be adjusted by moving the engaging rod P/N 7013 into the outside hole of engagement handle P/N 7020.

4.After belt tension is adjusted, check to assure that the mower blade will not turn freely when the engaging rod is in the "OFF" position.

5.If the mower blade turns freely, adjust the blade brake by loosening nut P/N 3205 at the end of the brake rod P/N 2988.

6.After adjustment is achieved, perform the safety checks listed below.

REMOVING THE MOWER BLADE

Secure blade P/N 2483 from turning. Remove blade bolt from center of blade P/N 3268, and blade washer P/N 6260 then remove blade P/N 2483. To reinstall. reverse above procedure.

WARNING:	Sharp edges on blade can cause injury!
	Caution should be exercised when service is required on blade.

REMOVING THE MOWER DECK

1.Loosen belt keepers P/N 7026 & 7027 located under the engine by loosening two rear engine mounting bolts, allowing the deck drive belt to come free of the rear pulley.

2.Disconnect the wiring loom at the deck safety switch P/N 4242.

3.Remove the two clevis pins P/N 3072 from the two rear L -rods P/N 1355 and slide from slots.

4.Remove clevis pin P/N 3072 from L-rod attached to lift handle and slide from slot.

5.Remove clevis pin P/N 3072 from front deck hanger shaft P/N 1332, located at front of mower deck on slide plates welded at battery box, and remove.

6.Lift front of mower chassis clear of deck. Roll chassis free of the deck.

7. To install, reverse the above procedure.

312 specifications

The Dixon 312 is a cutting-edge commercial vehicle known for its versatility and advanced features, making it a prominent choice in various industries, including delivery services, public transportation, and utility operations. With its robust design and innovative technologies, the Dixon 312 stands out in the competitive market of multi-purpose vehicles.

One of the main features of the Dixon 312 is its powerful engine performance. Equipped with a state-of-the-art engine, it offers an impressive balance of power and efficiency. The engine is designed to provide remarkable torque and acceleration, making it suitable for both urban and rural driving conditions. The vehicle's fuel efficiency is enhanced by advanced engineering techniques, ensuring lower operational costs and a reduced carbon footprint.

In terms of design, the Dixon 312 boasts a spacious and ergonomic cabin. The interior is meticulously crafted, prioritizing comfort and functionality for both the driver and passengers. The seating arrangement offers ample legroom and headroom, while the dashboard is equipped with user-friendly controls. Additional features such as adjustable steering, climate control, and extensive storage solutions enhance the overall driving experience.

The Dixon 312 is also integrated with cutting-edge safety technologies. Its safety suite includes advanced driver-assistance systems such as lane departure warning, automatic emergency braking, and adaptive cruise control. These features work together to provide a safer driving environment, reducing the likelihood of accidents and ensuring peace of mind for both drivers and passengers.

Furthermore, the vehicle is equipped with modern connectivity solutions. The infotainment system includes Bluetooth capabilities, touchscreen navigation, and smartphone integration, allowing drivers to stay connected while on the go. This technological integration not only enhances convenience but also promotes safer driving practices.

Durability is another hallmark of the Dixon 312. Built with high-quality materials, the vehicle is designed to withstand challenging conditions, making it ideal for commercial use. Its chassis is engineered for strength, while the suspension system ensures a smooth ride even on rough terrains.

In summary, the Dixon 312 represents an optimal blend of power, comfort, safety, and technology, making it a reliable choice for businesses and individuals alike. With its commitment to performance and user experience, the Dixon 312 continues to set new standards in the commercial vehicle segment.