Dixon 5000 Series manual Specifications

Page 11

 

SPECIFICATIONS

 

 

Model ZTR 5022

CHASSIS:

11 GA - rectangular tube

BODY:

Two piece - made of high-density polyethylene. Front body contains access

 

panels for battery service and engine to mower deck belt removal. Rear body

 

tilts up to allow service on the entire drive system.

SEAT:

Economically designed for operator comfort, contoured back rest and arm

 

rests. Seat is adjustable fore and aft.

MOWER DECK:

42" Deck:

13 GA Stamped Steel Construction - 42" Cut Width

 

50" Deck: 11 GA Fabricated Construction/Reinforcement Ribs - 50" Cut Width

 

60" Deck: 1 0 GA Stamped Steel Construction - 60" Cut Width

 

 

Cut height approximately 1 " to 4" via 7 position lift handle

BLADE DRIVE:

Electric clutch

DRIVE SYSTEM:

Each rear wheel is independently driven by a HydroGear BDU-10L Series 70

 

hydrostatic transmission. The hydrostatic transmissions, in turn, power a fully

 

enclosed HydroGear gearbox.

ENGINE:

22HP Kohler Command, 4-Cycle, V-Configuration, Overhead Valve, Air-Cooled,

 

Gasoline, Vertical Shaft, Aluminum Head, and Crankcase with Cast Iron Liners,

 

Full Pressure Lubrication/Full Flow Filter, Pulse-type Fuel Pump, Fixed Jet

 

Carburetor w/Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual Element

 

Air Cleaner.

STARTING SYSTEM:

Electric by key switch operation with safety interlocks on parking brake and

 

blade drive clutch.

TIRES:

Front

11 X 4 X 5 ribbed tread

 

Rear

20 X 10 X 8 Multi Trac

RECOMMENDED

Front

16-21 Ibs.

TIRE PRESSURE:

Rear

8 -14 Ibs.

CAPACITIES:

Fuel - 4.8 gallons total (dual tanks)

 

Hydrostat oil tank - 3 quart with in-line filter

 

Hydrostat oil recommendation, refer to page 35

 

Engine - 2 qts. SAE 10W30 (with filter)

DIMENSIONS:

Width

51 "(42" Deck), 60"(50" Deck), 72"(60" Deck)

 

Height

45"

 

Length

72"

 

Weight

615 lbs.(42" Deck), 680 lbs.(50" Deck), 685 lbs.(60" Deck)

NOTE:

Additional information provided in service instructions under the individual component

 

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Page 9

Image 11
Contents Page Important Read Carefully Index Safety Safety Alert Symbol General Operation Do not SafetyChildren Service Dixon Limited Warranty Policy -- HYDRO-GEAR Models Specifications Seat Adjustment Instructions Controls HYDRO-GEAR Drive System Parking BrakeTo SET Parking Brake Braking To GO ForwardTo GO Backward TurningBlade Drivecontrols Mower Deck CUT Height Lift LeverOperation Instructions Testing of Safety Interlock Systems Starting Instructions Cold Engine Starting Instructions Engine has been operated Mowing with a Mulching Attachment Maintain Sharp Blades Throughout The Cutting Season Mowing with a Grass Catcher AttachmentGrass Height Suggestions Side Discharge of the ClippingsDeck Deck RollersMaintenance Schedule Care and MaintenanceMower Blade Maintenance Engine to Mower Deck Belt Lubrication Fuel Shut OFF ValveSeries Rear Wheels Care and Maintenance Mower Deck Removal Mower Deck Leveling Procedure BOX to Hydrostat Belt Adjustment Parking Brake Cable Adjustment Neutral Adjustment Forward Travel Speed Adjustment Ohms Test Care and MaintenanceHydrostatic Transmission OIL and Filter Service Care and MaintenanceHydrostatic Transmission OIL and Filter Service Correct tire pressure is important for correct operation Standard Service Parts List Kohler AIR and OIL Filter Part Numbers Standard Service Parts ListSituation Causes Remedy Mower CUT QualityDrive System Situation Causes Remedy TroubleshootingTroubleshooting Page Owner Information Series Part No 5/98

5000 Series specifications

The Dixon 5000 Series is a groundbreaking range of commercial-grade lawn mowers that epitomizes durability, efficiency, and advanced technology. Designed for both professional landscapers and serious lawn enthusiasts, this series combines powerful performance with user-friendly features, making it a popular choice among turf management professionals.

One of the standout features of the Dixon 5000 Series is its robust construction. Built with heavy-duty frames and high-quality materials, these mowers are crafted to withstand the rigors of frequent use in various environments. The steel decks are designed for longevity and superior cutting performance, allowing operators to tackle tough mowing tasks with ease.

Equipped with powerful and efficient engines, the 5000 Series delivers impressive cutting speeds and performance. The mowers can be powered by reliable brand-name engines, providing users with consistent performance and peace of mind. With options for different horsepower ratings, users can choose the model that best meets their specific mowing needs.

The 5000 Series also features advanced cutting technology, including high-performance blades that ensure a clean and precise cut. The innovative cutting deck design promotes effective grass discharge and minimizes clumping, resulting in a healthier lawn. Additionally, adjustable cutting heights allow users to customize their mowing experience according to the grass type and season.

User comfort and ease of use are central to the design of the Dixon 5000 Series. The ergonomic seat design provides ample support for long hours of operation, while intuitive controls make it easy for operators to navigate the mower. The advanced steering system enhances maneuverability, allowing users to easily traverse tight corners and complex landscapes.

Furthermore, the 5000 Series incorporates innovative safety features to protect operators during use. These include safety switches that ensure the mower only operates when it’s safe to do so, reducing the risk of accidents.

Ultimately, the Dixon 5000 Series stands out for its reliability, powerful performance, and user-friendly features. With its robust construction, advanced cutting technology, and emphasis on operator comfort, this series is engineered to meet the demanding needs of professionals while delivering exceptional results. Whether for commercial or personal use, the Dixon 5000 Series is a top contender for anyone seeking a high-performance lawn mowing solution.