Dixon 7000 manual Hydrostatic Transmissions, Hydrostat Drive Belt Replacement Procedure

Page 28

CARE AND MAINTENANCE

HYDROSTATIC TRANSMISSIONS:

Before each use, check to be sure that the cooling fins of the hydrostatic transmissions are clean. Excessive accumulation of oil, dirt, or trash may cause the transmissions to overheat. NEVER WASH ACROSS TOP OF RESERVOIR WITH WATER OR STEAM. Fill reservoir as required per the maintenance schedule listed in this book.

HYDROSTAT DRIVE BELT REPLACEMENT PROCEDURE:

(The hydrostatic drive is equipped with a manual belt take-up).

A.Remove the 3/8" locknut, washers, and rubber spacer from the rear of the assembly.

B.Allow the idler arm/pulley to swing forward towards the fornt of the mower. Remove old belt if required. Replace with new belt.

C.With the belt in place on all pulleys, reinsert the rubber spacer, washers, and 3/8" locknut. Tighten 3/8" locknut until rubber spacer is deflected approximately 1/8" to 3/16". Make sure belt is not too tight. Belt deflection or movement should be approximately 1/4" to1/2" when measured at mid-point between hydro and idler pulley.

Page 28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operators Manual Important Read Carefully Index PagesSafety Safety Alert Symbol General Operation Slope Operation Children Service Dixon Limited Warranty Policy Commercial Models Specifications SeriesSeat Adjustment Instructions Controls Parking Brake To GO Backward Blade Drive Operation Instructions Before Operating MowerTesting of Safety Interlock Systems Starting Instructions Cold Engine Starting Instructions Grass Height Suggestions To Free Wheel Machine Unlock Transmission Care and Maintenance Maintenance ScheduleEngine Mower Blades BeltsLubrication Checking & Replenishing OIL in Hydrostatic TransmissionParking Brake Adjustment Hydrostat Drive Belt Replacement Procedure Hydrostatic TransmissionsSteering Control Adjustments Steering Control Adjustments Leveling the Deck Procedure for Raising and Lowering the Deck for Servicing Mower Shown in Operation Position Standard Service Parts List Model ZTRTroubleshooting Engine Wont Turn OverEngine Idles Poorly Page Page Owner Information Series

7000 specifications

The Dixon 7000 is a state-of-the-art equipment known for its versatility and efficiency in various applications. It has become a preferred choice among professionals seeking reliability and cutting-edge technology. This machine stands out due to its robust construction, ensuring durability and a long service life, which is crucial in demanding environments.

One of the main features of the Dixon 7000 is its advanced powertrain. It is equipped with a high-performance engine that delivers exceptional torque and performance. This enables operators to tackle heavy-duty tasks with ease, optimizing productivity while minimizing downtime. The efficient engine design also contributes to better fuel economy, making it a cost-effective solution for businesses.

In terms of technology, the Dixon 7000 incorporates sophisticated control systems that enhance operation and precision. The intuitive interface allows operators to easily manage settings and monitor performance metrics in real-time. This feature not only boosts user confidence but also ensures that operations are conducted safely and efficiently.

Equipped with a powerful hydraulic system, the Dixon 7000 excels in lifting and moving heavy loads. Its hydraulic capabilities are coupled with hydraulic attachments that enhance functionality, allowing for a wide range of tasks from lifting to maneuvering materials. This versatility makes it suitable for industries such as construction, agriculture, and logistics.

Another key characteristic of the Dixon 7000 is its ergonomic design. Comfort is a priority, with controls and seating designed to reduce operator fatigue. This ergonomics-focused design results in higher productivity, as operators can work for longer periods without discomfort. Additionally, the noise levels are kept to a minimum, ensuring a more pleasant working environment.

The Dixon 7000 also features advanced safety mechanisms, including a robust braking system and stability controls, which significantly reduce the risk of accidents. The presence of maintenance alerts keeps operators informed about service schedules, promoting longevity and optimal performance.

In conclusion, the Dixon 7000 represents a culmination of robust engineering, advanced technology, and user-centered design. Its main features and versatile characteristics make it an invaluable asset across various industries, supporting operators in achieving their tasks efficiently and safely. The combination of performance, ergonomics, and safety makes the Dixon 7000 a standout choice for those in need of reliable heavy equipment.
Top Page Image Contents