Dixon 966 004201 manual Assembly, 1INSTALLING Bagger Mount, 2INSTALLING Chute Support

Page 7

ASSEMBLY

1INSTALLING BAGGER MOUNT

1.Install the bagger mount tube to the rear guard with 5/16-18 x 3¼ bolts and flange nuts from kit.

NOTE: Depending on model, rear guard hole may need to be drilled out to 5/16" if kit hardware is too large.

2.Install kit support straps on the outside of the mount tube as shown in the illustration. Using a

5/16-18 x 1¼ bolt, attach the front side of the strap to the fender support. Do not add flange nut at this time. Place the reinforcement plate to the outside of the fender support. Secure with additional 1¼ bolt and fasten both bolts with flange nuts. Repeat steps on opposite side.

NOTE: The front side of the kit support straps should be on the inside of the mower frame.

3.Tighten all hardware.

Drill rear guard hole to 5/16" if needed

2INSTALLING CHUTE SUPPORT

1.Position upper chute support against bagger inlet, flush at outer edges. See Illustration.

2.Using support as a template, drill two 3/8 holes into bagger hood.

Upper Chute Support

Bagger Hood

Bagger Inlet

3.Secure upper chute support to hood with hex bolts, washers and nyloc nuts.

Flex Trim

Mount Tube

Reinforcement Plate

Support Strap

Nut

Flat Washers

Hex Bolt

8

Image 7
Contents Operator Parts Manual Grass Catcher Contents II. Slope Operation SafetySafe Operation Practices for RIDE-ON Mowers General OperationIII. Children IV. ServiceDo not Safety Tools Required Container ContentsParts Identification Unpacking Instructions1INSTALLING Bagger Mount Assembly2INSTALLING Chute Support 3CONTAINER Mounting Mounting Cover Assembly5CONTAINER Mounting 7UPPER Chute Installation 6LOWER Chute InstallationLeveling Mower Deck Chute / Hood InstallationTips for Improved Bagging Operation OperationGeneral Recommendations Customer ResponsibilitiesStorage Parts Item Part no QTY Description 12 6 QTY Description Item Part no Torque Specifications HEX Head CAP Screws Torque Chart115 149927 IR 02/12/09

966 004201 specifications

The Dixon 966 004201 is a versatile and highly regarded product that has made its mark across various industries, particularly in the field of fluid management. Known for its quality and reliability, this model merges advanced technology with practicality, making it a favored choice among professionals.

One of the main features of the Dixon 966 004201 is its robust construction. It is made from high-grade materials that ensure durability and longevity, even in demanding environments. This enhances the product's resistance to wear and tear, making it ideal for use in manufacturing, agricultural, and construction settings.

The Dixon 966 004201 is designed with user convenience in mind. It incorporates a lightweight design that allows for easy handling and portability. The ergonomic features ensure that users can operate the product comfortably, reducing fatigue during extended use. This is particularly important in applications where efficiency and speed are paramount.

In terms of technology, the Dixon 966 004201 boasts advanced coupling capabilities. It utilizes a reliable locking mechanism that ensures a secure connection, minimizing the risk of leaks or disconnections during operation. This not only enhances safety but also improves overall system efficiency.

Another noteworthy characteristic is its adaptability. The Dixon 966 004201 is compatible with a wide range of hoses, making it an excellent choice for diverse applications. Whether in a high-pressure system or a low-flow situation, this model can meet the varying demands.

Additionally, the product features a corrosion-resistant finish that extends its lifespan while maintaining optimal performance. This is crucial for applications involving chemicals or corrosive materials, where equipment must withstand harsh conditions without compromising on quality.

Maintenance is straightforward with the Dixon 966 004201, as it is designed for easy cleaning and servicing. This reduces downtime and ensures that the product remains operational for extended periods, offering excellent value for investment.

Overall, the Dixon 966 004201 stands out due to its combination of durability, usability, and technological innovation. Its features make it a valuable asset for professionals who require reliable and efficient fluid management solutions across various sectors. Whether for industrial use or agricultural applications, this model continues to set a high standard in its category.