Dixon 61935-0603 manual Mower Blades

Page 31

CARE AND MAINTENANCE

CAUTION Stop engine and remove ignition key for safety. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade.

MOWER BLADES:

Check sharpness of mower blades after every 10 hours of operation. To sharpen blades, proceed as follows.

1.Remove bolt and flat washer mounting blade on shaft. Remove blade.

2. Blades should be discarded when worn excessively.

3.Sharpen blade with a hand file, electric grinder or blade sharpener. Wear gloves and eye protection when sharpening.

Grind blade at original 25 degree bevel.

4.Check balance of blade by positioning the blade on a nail or blade balance pedestal. Grind the blade on the end that is heavier until both sides balance.

5.Install blade, flat washer & bolt. Make sure to tighten bolt to 60 ft. lbs.

DANGEROUS!

DO NOT USE

BLADE IN THIS

CONDITION!

New Blade

When notch starts, discard blade

Image 31

Contents Model Important Read Carefully D E Safety Safety Alert Symbol General Operation General Operation Do not mow it Slope OperationDo not Children Service Service Dixon Limited Warranty Policy Specification S Seat Adjustment Instructions Controls To GO Forward Control LeversHydraulic Drive System Choke Control LeverThrottle Control Lever Parking BrakeMower Deck CUT Height Lift Lever Blade DriveOperation Instructions Before Operating Mower Testing of Safety Interlock Systems Blade Drive Switch Test Electric Clutch Starting Instructions cold engine Starting Instructions engine has been operated Maintain Sharp Blades hroughout The Cutting Season Grass Height and Cutting Suggestions To Free Wheel Machine Unlock Transmission Care and Maintenance G I N E Mower Blades Hydrostatic Transmissions LubricationBelts Electrical Systems Hydrostat OIL Maintenance Procedure Procedure for Raising and Lowering the Deck for Servicing Positionoperation Inshown Mower Mower Shown in Servicing Position Leveling the Deck Model ZTR Standard Service Parts ListTroubleshooting Engine Overheated Page Owner F O R M a TI O N ZTRMowers

61935-0603 specifications

The Dixon 61935-0603 is a highly versatile and robust product designed for a variety of applications in the industrial and commercial sectors. Built with durability in mind, this model is particularly popular among professionals who require a reliable and efficient solution for their needs.

One of the main features of the Dixon 61935-0603 is its exceptional resistance to various environmental factors. It is engineered to withstand exposure to UV light, ozone, and extreme temperatures, making it suitable for outdoor use and harsh conditions. This durability ensures a longer lifespan, reducing the need for frequent replacements and maintenance.

The technology behind the Dixon 61935-0603 emphasizes efficiency and ease of use. Equipped with advanced sealing mechanisms, this product effectively prevents leaks and provides a secure connection, which is crucial in applications involving fluids and gases. The design incorporates user-friendly features, allowing for quick and straightforward installation, even in complex setups.

The material composition of the Dixon 61935-0603 also contributes to its performance characteristics. Made from high-quality, chemically resistant materials, the product is safe for use with a wide range of substances, including acids and solvents. This versatility extends its application across various industries, including chemical processing, food and beverage production, and construction.

Another significant characteristic of the Dixon 61935-0603 is its compatibility with a range of fittings and attachments. This feature enhances its functionality, enabling users to customize their setups according to specific requirements. Whether integrating with existing systems or creating new configurations, the versatility of this model makes it an ideal choice for many professionals.

Additionally, the Dixon 61935-0603 has been designed with safety in mind. It includes features that minimize the risk of accidents and spills, allowing for safe operation in demanding environments. This attention to safety further solidifies its standing as a preferred option among those who prioritize both performance and risk management.

In summary, the Dixon 61935-0603 stands out due to its durability, efficiency, and versatility. Its advanced features, reliable technology, and compatibility with various applications make it a critical component in many industrial operations. Whether for routine use or in specialized applications, this product is engineered to meet and exceed user expectations.