Dixon 16134-0803 manual Specifications

	SPECIFICATIONS
	Speedztr 42 & Speedztr 36
Chassis:	11 gauge steel welded frame assembly
Body:	All body parts made of high density polyethylene. Dent and
	corrosion resistant.
Mower Deck:	36” Deck: 11 GA fabricated construction-36” cut width
	42” Deck: 13 GA stamped steel construction-42” cut width
Blade Drive:	Electric clutch.
Transmission:	Each rear wheel is independently driven by a Hydro Gear
	EZT hydrostatic drive.
Engine:
Speedztr 42:	15.5 HP Briggs & Stratton Intek, single cylinder, overhead
	valve, air cooled, gasoline, vertical shaft with cast iron
	cylinder, pressure lube with spin-on filter.
Speedztr 36:	14.5 HP Briggs & Stratton Intek, single cylinder, overhead
	valve, air cooled, gasoline, vertical shaft with cast iron
	cylinder, pressure lube with spin-on filter.

Starting System: Electric-key switch operation w/safety interlock blade drive.

Tires:	Front - 11 x 4.00-5 ribbed tread (16-21 PSI)
	Rear (42)-18 x 8.50 x 8 - 4 ply turf tread (8-14 PSI)
	Rear (36)-18 x 6.50 x 8 - 4 ply turf tread (8-14 PSI)
Capacities:	Fuel	3 gallons
	Engine Oil	1.5 quarts
Dimensions:	Width	40” maximum track width
	Height	40” to top edge of seat
	Length	72” hitch tab to front bumper
	Weight	475 lbs

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

14