Dixon 10504-1101 manual Blade Drive

Page 17

CONTROLS

BLADE DRIVE:

•Located on the control panel, on the operator’s right.

•To engage the mower blades, pull up on the switch.

•To disengage mower blade, push down.

CIRCUIT BREAKER:

•Protection of the electrical system is by

(1) 15 amp circuit breaker.

•If circuit breaker trips, push button to reset.

•If this condition repeats, consult dealer for inspection and repair.

THROTTLE CONTROL LEVER:

•Located on control panel to operator’s right.

•Throttle control for engine speed.

•Choke for engine starting.

•Throttle control should be set to MAXIMUM or wide open setting to ensure adequate cooling of the engine and to maintain mower deck blade speed while mowing.

MOWER DECK LIFT LEVER:

•Located to the right of the control levers.

•Controls the cutting height.

•Eight positions of adjustment.

•Move lever left and forward to lower.

•Move lever left and back to raise.

NOTE: Always use high for transport.

Image 17

Contents OPERATOR’S Manual Important Read Carefully Index Safety Safety Alert Symbol Never carry passengers General OperationGeneral Operation Do not Slope OperationNever allow children to operate the mower ChildrenService Service Blue/Customer Yellow/Dealer White/Dixon Ind Model Zeeter Classic SpecificationsSeat Adjustment Instructions Parking Brake ControlsTo SET Parking Brake Transmission Drive SystemTo GO Forward Control LeversBlade Drive Towing Operation InstructionsBefore Operating Mower Engine should not Turn Over Or Attempt to Start Testing of Safety Interlock SystemsStarting Instructions Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Maintenance Schedule Care and MaintenanceTires BatteryEngine Cutter Blade Maintenance Belt Tension BeltsMower Deck Leveling Prcedure Deck Removal OIL Fill Changing the Engine OILDrive System Adjustments Rear Chain Adjustment Locations LubricationWarranty Cleaning the MowerPARTS/SERVICE Electrical SystemsStandard Service Parts List Troubleshooting Engine Runs but Mower WON’T Move Forward Page Owner Information ZTRMowers

10504-1101 specifications

Dixon 10504-1101 is a highly regarded product in the industrial domain, particularly known for its application in fluid transfer and handling. This specific model is part of Dixon's expansive line of innovative products designed to ensure safe and efficient fluid delivery in various industries.

One of the main features of the Dixon 10504-1101 is its robust construction. Manufactured with high-quality materials, this component boasts excellent durability and resistance to corrosion, which makes it suitable for use in demanding environments, including chemical processing, oil and gas, and water treatment facilities. The quality of materials used in this assembly guarantees not only longevity but also reliable performance during usage.

Technologically, the Dixon 10504-1101 incorporates advanced design methods that enhance its functionality. One notable characteristic is its ability to withstand high-pressure applications, making it capable of managing rigorous demands typical in industrial settings. This product integrates seamless joining techniques that minimize leaks, thus increasing efficiency and safety during fluid transfer operations.

Moreover, the Dixon 10504-1101 is designed for rapid installation, ensuring minimal downtime for facilities. The ease of use is particularly advantageous in environments where time is critical and interruptions must be minimized. The user-friendly design features intuitive connections that simplify maintenance and replacements.

Another noteworthy characteristic of the Dixon 10504-1101 is its versatility. It is compatible with a wide range of fittings and hoses, providing flexibility in different applications, whether hydraulic or pneumatic. This adaptability makes it a preferred choice among professionals who require reliable components that can be used across different systems and configurations.

The design of the Dixon 10504-1101 also places emphasis on safety and compliance with industry standards. It undergoes rigorous testing to ensure it meets or exceeds operational and safety guidelines, which reassures users regarding its performance under various conditions.

In summary, the Dixon 10504-1101 is a premier choice for those in need of a strong, efficient, and versatile fluid handling solution. With its advanced materials, pressure handling capabilities, easy installation, and safety compliance, it stands out as a reliable component for a myriad of industrial applications. It embodies the quality and innovation that Dixon is known for, making it an essential asset for industrial operations.