Dixon 11806-106 manual Belts, Belt Tension

Page 37

CARE AND MAINTENANCE

BELTS:

Check belts every 50 hours. Replace any belts found to be in poor condition.

BELT TENSION:

Mower Deck Serpentine Belt:

P/N 9758

Manual adjustment. Refer to illustrationfor

adjustment procedure.

 

Engine to Mower Deck Belt:

P/N 17179

The engine to mower deck drive belts are automatically held in proper tension by springs which push the deck assembly forward and do not require any additional adjustment to be made.

Idler Weldment

 

Idler Shock Mount

 

 

 

“L” Rod

Hex Nut

 

 

3/4” (Serpentine)

Tighten or Loosen Hex Nut to achieve this dimension (approximate)

Note: Belt deflection or movement should be approximately 1/4” when measured at mid-point between pulleys. Periodically inspect both belt and idler systems.

37

Image 37
Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Kodiak ELS-60 SpecificationsSeat Adjustment Instructions Control Levers ControlsTo SET Parking Brake Parking BrakeMower Deck CUT Height Lift Lever Circuit Breaker Blade DriveChoke and Throttle Control Levers Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat Fluid Maintenance Procedure Neutral Adjustment Neutral Spring Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Warranty Cleaning the MowerPARTS/SERVICE Electrical SystemsMower Deck Removal Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Blades Standard Service Parts ListBelts Engine AIR and OIL FiltersDate OIL Changed OWNER’S InformationDixon INDUSTRIES, INC